User Tools ( Copier Features ); Accessing User Tools ( Copier Features ); Changing Default Settings - Ricoh VB2807800 Operating Instructions Copy Reference

4. User Tools ( Copier Features )

Accessing User Tools ( Copier Features )

This section is for key operators in
charge of this machine. Key operators
can change or make default settings.
Note
❒ Be sure to quit User Tools and re-
turn to the initial copy display
when all settings are complete.
This section describes system set-
tings for the copier function.
❒ Selected settings are highlighted.
❒ Any changes made with User
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the {Clear
Modes} key is pressed.
Reference
For details, see "User Tools ( Sys-
tem Settings )", General Settings
Guide.

Changing Default Settings

Note
❒ If a key operator code is set, the
key operator code input display
appears before you can change the
default settings. For details about
access codes, see " Key Operator
Tools ", General Settings Guide.
A
Press the {User Tools/Counter} key.
B
Select [Copier Features] using {U}
or {T}, and then press the {OK}
key.
C
Select the menu using {U} or {T},
and then press the {OK} key.
ARK004S
49