Placing Originals; Placing Originals On The Exposure Glass - Ricoh AFICIO 120 Operating Instructions Manual

StellaC1a-EN-CopyF_V4_FM.book Page 19 Wednesday, September 12, 2001 4:03 PM

Placing Originals

Limitation
❒ Place originals after correction flu-
id and ink has completely dried.
Not taking this precaution could
mark the exposure glass and cause
marks to be copied.
Note
❒ Basically, the originals should be
aligned to the rear left corner.
However, some copy functions
may produce different results de-
pending on the direction of the
originals. For details, see explana-
tions of each function.
Originals Document
feeder
(ADF)
Reference
See p.10 "Originals".
Placing Originals on the
Exposure Glass
A A A A
Lift the exposure glass cover or
the document feeder (ADF).
B B B B
Place the original face down on
the exposure glass. The original
should be aligned to the rear left
corner.
Exposure
glass
1.
Reference mark
2.
Scale
C C C C
Lower the exposure glass cover or
the document feeder (ADF).
Placing Originals
2
19