Other Printing Problems - Ricoh AFICIO 120 Operating Instructions Manual

Troubleshooting

Other Printing Problems

Problem
An image is printed on the reverse side of the
paper.
Multiple pages are fed through the printer at
once.
Paper misfeeds occur frequently.
3
An control panel error message stays on after
removing the misfed paper.
It takes a long time for the printer to start
printing.
It takes too much time to complete the print job. The data is so large or complex that it takes
Windows 95/98/Me, 2000, NT 4.0 :
The computer does not recognize the installed
printer options.
No image is printed when loading paper on
the bypass tray.
22
Action
Set the paper upside down.
Remove all the paper from the tray and fan
them gently.
Check the paper size settings. Use the recom-
mended paper. Avoid using curled, folded or
wrinkled paper, perforated paper, or glossy
paper.
A paper misfeed message will remain until the
front cover is opened and then closed. Open
the front cover and close it.
The machine might be in Energy Saver mode
or Low Power mode, which requires more
time for warming up and resuming the print
job.
time to process it.
If the Data In indicator is blinking, the data
processing is being done.
Just wait until it is finished.
If the printer is not connected to a network,
specify which options you have installed us-
ing the printer driver.
See the HELP file of the printer driver.
The machine operates the function that forces
to feed the paper in three minutes after you
load the paper on the bypass tray. Load the pa-
per on the bypass tray again.