Making Initial Checks; Table 18 Confirming Mode Of Operation And Identifying Software Versions - Honeywell ST 3000 User Manual

5.3

Making Initial Checks

Checking mode and
software
Table 18 Confirming Mode of Operation and Identifying Software Versions.
Step Press Key
1
^
SHIFT
A <–>DE
Q
2
CLR
(No)
3
^
SHIFT
SW VER
X
3
4
CLR
(NO)
Analog and DE
modes
6/05 ST 3000 Release 300 and SFC Model STS103 User's Manual
Before doing anything else, it is a good idea to confirm the transmitter's
mode of operation and identify the version of software being used in the
SFC and the transmitter. Table 18 outlines the steps for quickly
checking the transmitter's mode of operation and software versions of
the SFC and the transmitter.
Read Display or Action
L I N D P S
S H I F T –
A / D E S T
C H N G T O D E
OR
A / D E S T
C H N G T O A N
L I N D P S
R E A D Y . . .
L I N D P S
S H I F T –
.
S / W N O S T
= X M T R = 3
S F C 4 . 5
L I N D P S
R E A D Y . . .
In the analog transmission mode, the transmitter sends a proportional 4
to 20 milliampere output signal that can be used as a compatible analog
input signal to a controller or a recorder in the control room
Initiates shift key selection. Note that
T 3 Ø Ø Ø
transmitter tag number ST 3000 in
top row is used for example
purposes only.
Asks if you want to change to DE
3 Ø Ø Ø
?
(digital) mode. This means
transmitter is in analog mode of
operation.
Asks if you want to change to
3 Ø Ø Ø
analog mode. This means
?
A L O G
transmitter is in DE (digital) mode of
operation.
Exits analog to DE change function.
T 3 Ø Ø Ø
Initiates shift key selection.
T 3 Ø Ø Ø
Both SFC and XMTR software
3 Ø Ø Ø
versions appear in display. Note that
. Ø
only SFC version appears when
SFC is not connected to transmitter
or [
SHIFT
been pressed for transmitter in DE
mode.
Exit function. SFC is "READY" for
T 3 Ø Ø Ø
next operation.
Description
] and [ ] keys have not yet
ID
Continued on next page
55