Changing Mode Of Operation - Honeywell ST 3000 User Manual

5.4

Changing Mode of Operation

Procedure
Table 19

Changing Mode of Operation.

Step Press Key
1
^
SHIFT
A <–>DE
Q
2 NON-VOL
ENTER
(Yes)
3 NON-VOL
ENTER
(Yes)
58 ST 3000 Release 300 and SFC Model STS103 User's Manual
If you need to change your transmitter's mode of operation, use the
steps in Table 19 to change the mode from analog to digital or digital to
analog. If you have an optional Local Smart Meter, you can readily tell
your transmitter's present mode of operation by checking whether the
ANALOG indicator on the meter display is lit or not.
Read Display or Action
L I N D P S
S H I F T –
A / D E S T
C H N G T O D E
OR
A / D E S T
C H N G T O A N
A / D E S T
A R E Y O U S U
A / D E S T
S F C W O R K I N
A / D E S T
D E
OR
A / D E S T
A N A L O G
L I N D P S
R E A D Y . . .
Initiates shift key selection. Note that
T 3 Ø Ø Ø
transmitter tag number ST 3000 in
top row is used for example
purposes only.
Asks if you want to change to DE
3 Ø Ø Ø
?
(digital) mode. If you want to change
mode, go to Step 2. If you do not
want to change mode, press [
key to exit function.
Asks if you want to change to
3 Ø Ø Ø
?
A L O G
analog mode. If you want to change
mode, go to Step 2. If you do not
want to change mode, press [
key to exit function.
Prompt asks for confirmation of
3 Ø Ø Ø
mode change.
?
R E
Message exchange is working.
3 Ø Ø Ø
G . . .
Mode of operation is now DE
3 Ø Ø Ø
(digital).
X M T R
Mode of operation is now analog.
3 Ø Ø Ø
X M T R
Ready for next function.
T 3 Ø Ø Ø
Description
]
CLR
]
CLR
Continued on next page
6/05