Honeywell ST 3000 User Manual page 43

4.2 Mounting ST 3000 Transmitter,
Bracket mounting,
continued
6/05 ST 3000 Release 300 and SFC Model STS103 User's Manual
Table 9 Mounting ST 3000 Transmitter to a Bracket, continued
4 Loosen set screw on outside neck of transmitter one full turn. Rotate
electronics housing a maximum of 180 degrees in left or right
direction from center to the position you require and tighten set screw
(13 to 15 lb-in/1.46 to 1.68 N . m).
Example - Rotating electronics housing.
180 degrees
max.
ATTENTION
SFC includes 2.5, 3, and 4mm size wrenches. You will need the
4mm size wrench for the outside set screw.
Continued
The metric socket head wrench kit supplied with the
Electronics
Housing
180 degrees
max.
Set Screw
Continued on next page
29