Section 2 -Quick Start Reference; Introduction - Honeywell ST 3000 User Manual

2.1

Introduction

Section Contents
About this section
6/05 ST 3000 Release 300 and SFC Model STS103 User's Manual
Section 2 —Quick Start Reference
This section includes these topics:
Section
2.1 Introduction ................................................................................. 15
2.2 Getting ST 3000 Transmitter On-Line Quickly ............................16
This section assumes that the ST 3000 transmitter has been installed and
wired correctly, and is ready to be put into operation. It also assumes
that you are somewhat familiar with using the SFC and that the
transmitter has been configured correctly for your application. If the
transmitter has not been installed and wired, you are not familiar with
SFC operation, and/or you do not know if the transmitter is configured
correctly, please read the other sections of this manual before starting up
your transmitter.
This section provides a list of typical start-up tasks and tells you where
you can find detailed information about performing the task.
Topic See Page
15