6.1
Introduction
Section Contents
About this section
ATTENTION
60
ST 3000 Release 300 and SFC Model STS103 User's Manual
Section 6 -Configuration
This section includes these topics:
Section
Topic
6.1
Introduction ................................................................................. 59
6.2
Overview ..................................................................................... 60
6.3
Entering a Tag Number............................................................... 71
6.4
Selecting Output Form ................................................................ 73
6.5
6.6
Selecting Unit of Measurement ................................................... 78
6.7
Setting Range Values Using SFC ............................................... 80
6.8
6.9
Selecting Output Signal Mode (DE Mode Only).......................... 91
This section introduces you to ST 3000 transmitter configuration. It
identifies the parameters that make up the transmitter's configuration
database and provides procedures for entering values/selections for the
given configuration parameters.
If you will be using the SCT 3000 software Release 3.12.2 or greater
instead of an SFC to configure the transmitter, follow the SCT 3000 on-
line help and on-line documentation to configure the transmitter's
database.
See Page
6/05