(12) Rough Image - Minolta Di200 Service Manual

(12) Rough Image

Section Step
1 Image Transfer Roller is dirty or
deformed.
2 Image transfer current contact terminal
is dirty or deformed.
3 Toner has caked or is contaminated
Engine
with foreign matter in Toner Hopper.
1 CCD2 Board and MFB2 Board are
connected properly.
IR 2 MFB2 Board and Master Board are
connected properly.
<Typical Faulty Images>
4011T527AA
Check
T-59
Result Action
YES Clean or change.
YES Clean or change.
YES Remove foreign matter.
Change toner.
NO Change I/C.
Change High Voltage
Unit.
Change Master Board.
NO Correct.
YES Change CCD Unit.
Change MFB2 Board.
NO Correct.