Table of Contents
Advertisement
3.3 User Accessibility Operations
To change the auto panel reset time ("Confirming Screen" function)
If no operation is performed for a specified length of time, the Basics screen is
displayed and all modes and functions are reset to their default settings.
With the "Confirming Screen" function, the length of time until the machine is reset
can be specified.
1
Press the [Accessibility] key in the control panel.
2
Touch [Confirming Screen].
3
Select the desired length of time
for displaying the screen
requesting confirmation to reset
the machine.
❍
Touch [30 sec.], [60 sec.], [90
sec.] or [120 sec.].
❍
To immediately display the
Basics screen without
displaying a screen requesting
confirmation to reset the
machine, touch [None].
4
Touch [Enter].
To change the display time for the "The job is accepted." screen
("Notification Screen" function)
The length of time that the "The job is accepted." screen, which requests
confirmation of a reception number or job ID after copying is finished, can be
specified.
1
Press the [Accessibility] key in the control panel.
2
Touch [Notification Screen].
3
Select the desired time setting.
❍
Touch [3 sec.], [10 sec.] or [60
sec.].
❍
To leave the "The job is
accepted." screen displayed
until [Enter] is touched, touch
[No Limit].
4
Touch [Enter].
Di2010f/Di2510f/Di3010f/Di3510f
3
3-7
Advertisement
Table of Contents
