To Set The "Auto Panel Reset" Parameter - Minolta CF1501 Operator's Manual

Utility Mode Operations

To set the "Auto Panel Reset" parameter

This parameter can be used to turn off ("OFF") the panel reset, or to spec-
ify the length of time (between 1 and 9 minutes) after the last operation
until the touch panel automatically returns to its default settings. The de-
fault setting is "1 min."
1
In the User's Choice screen, touch
[Auto Panel Reset].
2
Using the keypad, enter the desired
number of minutes, and then touch
[Enter].
? Do you wish to change the num-
ber of minutes entered?
§ Press the [C] (clear) key to
erase the entered number, and
then use the keypad to enter the
correct number of minutes.
3
In the User's Choice screen, touch [Exit].
CF1501/CF2001
8
8-15