Figure 11-5: Ip Address Distribution - Dhcp Server; Figure 11-6: Ip Address Distribution - Dhcp Relay; Figure 11-7: Dhcp Relay Server Address; Table 11-3: Dhcp Relay - AudioCodes MP-20x User Manual

MP-20x Telephone Adapter
Parameter
Provide Host Name If
Not Specified by
Client
Parameter
DHCP Relay
1. After selecting 'DHCP Relay' from the drop down list, a New IP Address link appears:
2. Click the New IP Address link; the 'DHCP Relay Server Address' screen appears:
3. Specify the IP address of the DHCP server.
4. Click OK to save the settings.
Version 3.0.1
If the DHCP client does not have a host name, the device automatically
assigns one for him.

Figure 11-5: IP Address Distribution - DHCP Server

Table 11-3: DHCP Relay

Your device can act as a DHCP relay in case you would like to dynamically
assign IP addresses from a DHCP server other than your Telephone Adapter's
DHCP server. Note that when selecting this option you must also change the
device's WAN to work in routing mode. For detailed information, refer to
Section 10.28.2.

Figure 11-6: IP Address Distribution - DHCP Relay

Figure 11-7: DHCP Relay Server Address

Description
Description
127
11. VLAN and Bridge Settings
July 2010