MP-202 Telephone Adapter
Use the Following IP Address
10.1.3 IP Address Distribution
The 'IP Address Distribution' section allows you to configure the device's Dynamic Host
Configuration Protocol (DHCP) server parameters. The DHCP automatically assigns IP
addresses to network PCs. If you enable this feature, make sure that you also configure
your network PCs as DHCP clients. For a comprehensive description of this feature, refer
to Section 10.28.
Select one of the following options from the 'IP Address Distribution' combo box:
User's Manual
Figure 10-5: Internet Protocol Settings . Static IP
Your WAN connection can be configured using a
permanent (static) IP address. Your service
provider should provide you with this IP address,
subnet mask and the default Telephone Adapter
IP address.
107
10. VLAN and Bridge Settings
February 2007