AudioCodes MP-202 - FXS Telephone Adapter Quick Installation Guide

Before Installing

Congratulations on purchasing your AudioCodes MP-202 FXS Telephone Adapter. Before you begin using the device, make sure that the following items are included in the shipped box:

• AudioCodes' MP-202 FXS Telephone Adapter
• A 12V AC/DC power cord adaptor (use only supplied)

You'll also need (not supplied by AudioCodes):

• A broadband Internet connection (e.g., Cable or DSL modem)
• Analog telephones
• A personal computer
• RJ-11 telephone cables
• Two RJ-45 Ethernet cables

Cabling and Installing the Device

To cable and install MP-202:

1. Connect the MP-202's Ethernet connector labeled WAN to your cable or DSL modem, using the Ethernet cable.
   
2. Connect the MP-202's Ethernet connector labeled LAN/PC to your PC, using the second Ethernet cable.
3. Connect the MP-202's telephone ports labeled PHONE to analog telephones, using the RJ-11 telephone cables.
4. Connect MP-202 to a standard 110/220 VAC electrical wall outlet, using the AC/DC power adapter; the POWER LED is lit (green) and when initialization completes (~ 1 minute), the STATUS LED changes from red to green.

Configuring Network Parameters

To configure network parameters:

1. On your PC, verify that the Local Area Connection status is "Connected", by clicking Start > Settings > Network Connections, and then doubleclicking the Local Area Connection icon.
2. If the LAN status is "Disconnected", click Properties, select 'Internet Protocol (TCP/IP)', and then click Properties; ensure that the 'Obtain an IP address automatically' option is selected.
3. Open a Web browser and enter the URL address http://MP20x.home (or http://MP202.home):
   
   The MP-202 embedded Web server's 'Welcome' screen is displayed.
4. Define a new password (record and retain it for future reference).
5. In the Quick Setup page, select the Internet connection method. Consult with your ISP for the required connection type (DHCP, PPPoE, PPTP or L2TP), and then click OK. The Network map displays the elements connected to MP-202. Your PC is now connected to the Internet and you are ready to configure VoIP parameters.

If there is no Internet connection, a red "X" appears below the globe icon on the MP-202 Web server's Home page. Consult with your ISP for valid connection parameters.

Configuring VoIP Parameters

To make VoIP calls, register with an ISP and obtain the account and SIP proxy information.

To configure VoIP parameters:

1. From the menu bar in the left pane, click Voice Over IP; the Voice Over IP page opens in the right pane.
2. Click the Line Settings tab, select check boxes only of lines that are connected to telephones (clear those not connected), and click Apply.
3. Click the Action icon corresponding to your FXS telephone lines, and then in the Line Settings page, configure the parameters with values provided by your ISP.
4. Click the Signaling Protocol tab and then select the 'Use SIP Proxy' check box. In the 'Proxy IP Address or Host Name' field, enter the ISP's proxy IP address or host name as provided by your ISP. Click OK to complete the VoIP configuration.

To verify successful registration to the Proxy server, ensure that the PHONE LEDs flash green, or in the Voice over IP tab (System Monitoring menu), the entry 'SIP Registration' displays "Registered" for the configured FXS lines.

5. Pick up the phone receiver and listen for the dial tone; you're now ready to make an outgoing VoIP call.

Notice Information

This Quick Guide describes the quick setup for MP-202 Telephone Adapter model. Information contained in this document is believed to be accurate and reliable at the time of printing. However, due to ongoing product improvements and revisions, AudioCodes cannot guarantee accuracy of printed material after the Date Published nor can it accept responsibility for errors or omissions. Software updates can be viewed by registered customers on AudioCodes' Web site at www.audiocodes.com/downloads.

© Copyright 2016 AudioCodes Ltd. All rights reserved.
This document is subject to change without notice.
Date Published: June-14-2016 Document #: LTRT-18722
International Headquarters
1 Hayarden Street, Airport City, Lod 7019900
P.O. Box 255, Ben Gurion Airport, Israel, 7019900
Tel: +972-3-976-4000 Fax: +972-3-976-4040

Documents / Resources

References

• Marketing

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download AudioCodes MP-202 - FXS Telephone Adapter Quick Installation Guide