Figure 13-14: Edit Service Server Ports; Figure 13-15: Edit Service Server Ports; Figure 13-16: Edit Service Opened Ports - AudioCodes MP-20x User Manual

2. Enter a name for the service (e.g., 'game_server'), and then click the link New Trigger
Ports; the screen 'Edit Service Server Ports' opens.
3. In the 'Protocol' drop-down list, select 'UDP'; the screen refreshes, providing source
and destination port options.
4. Leave the 'Source Ports' drop-down list at its default 'Any'. In the 'Destination Ports'
drop-down list, select 'Single'; the screen refreshes again, providing an additional field
in which you should enter '222' as the destination port.
5. Click OK to save the settings.
6. In the screen 'Edit Service', click the link New Opened Ports; the screen 'Edit Service
Opened Ports' opens.
7. Similar to the trigger ports screen, select UDP as the protocol, leave the source port at
'Any', and enter a 333 as the single destination port.
MP-20x Telephone Adapter

Figure 13-14: Edit Service Server Ports

Figure 13-15: Edit Service Server Ports

Figure 13-16: Edit Service Opened Ports

188
User's Manual
Document #: LTRT-50609