Table 12-9: Internetgatewaydevice.services.voiceservice.i.capabilities - AudioCodes MP-20x User Manual

MP-20x Telephone Adapter
TR-069/TR-104
Parameter
IPRouters
MaxAddress
MinAddress
SubnetMask
12.2.2.1.3 Configuring VoIP via TR-104

Table 12-9: InternetGatewayDevice.Services.VoiceService.i.Capabilities

TR-069/TR-104
Parameter
ButtonMap
DSCPCoupled
EthernetTaggingCou
pled
Version 3.0.1
Configuration File
Parameter
ip_routers_get/set
lan_host_config_managem
ent_get/set
rg_conf dhcps/end_ip
lan_host_config_managem
ent_get/set
rg_conf dhcps/start_ip
lan_host_config_managem
ent_get/set
rg_conf dhcps/ netmask
Configuration File
Parameter
-
-
-
12. Remote MP-20x Telephone Adapter Management
Comma-separated list of IP addresses of
routers on this subnet. Also known as
default gateway. Support for more than
one Router address is optional.
Specifies the last address in the pool to be
assigned by the DHCP server on the LAN
interface.
Specifies the first address in the pool to be
assigned by the DHCP server on the LAN
interface.
Specifies the client's network subnet mask.
Support for a configurable button map. A true
value indicates support for a configurable
button map via the
VoiceService.{i}.VoiceProfile.{i}.ButtonMap
object.
A true value indicates that the CPE is
constrained such that transmitted call control
packets use the same DSCP marking as
transmitted RTP packets.
If the value is true, the CPE must not support
the DSCPMark parameter for call control.
A true value indicates that the CPE is
constrained such that transmitted call control
packets use the same Ethernet tagging
(VLAN ID Ethernet Priority) as transmitted
RTP packets.
If the value is true, the CPE must not support
the VLANIDMark or EthernetPriorityMark
parameters within a call control object (e.g.,
SIP, MGCP, or H323).
161
Description
Description
July 2010