Table of Contents
Advertisement
Quick Links
MediaPack™ 20x FXS Telephone Adapter
Quick Setup Guide
Welcome
Congratulations on purchasing your AudioCodes MediaPack 20x Telephone Adapter (MP-20x), hereafter
referred to as device!
This document provides basic setup instructions for cabling the device and for connecting it to the Internet.
Before you begin, please read the
Package Contents
Make sure that the following items (in addition to any separate-orderable items that you may have purchased)
are included with your shipped device:
1 x 12V AC power adapter
1 x RJ-11 telephone cable
1 x RJ-45 Ethernet cable
Regulatory Information document
This Quick Guide
Safety Precautions
on page 7.
1 |
P a g e
Advertisement
Table of Contents
Related Manuals for AudioCodes MediaPack 20 Series
Summary of Contents for AudioCodes MediaPack 20 Series
-
Page 1: Quick Setup Guide
MediaPack™ 20x FXS Telephone Adapter Quick Setup Guide Welcome Congratulations on purchasing your AudioCodes MediaPack 20x Telephone Adapter (MP-20x), hereafter referred to as device! This document provides basic setup instructions for cabling the device and for connecting it to the Internet. -
Page 2: Rear Panel Description
Rear-Panel Description [Number of FXS Phone Ports and Presence of USB Port Depend on MP-20x Model] 12VDC AC power socket. Reset pinhole button for resetting the device or restoring it to factory defaults. To reset: With a paper clip (or any other similar pointed object), press the ... -
Page 3: Front Panel Description
Front-Panel Description [Number of PHONE LEDs and Presence of USB LED Depend on MP-20x Model] PHONE LED indicating FXS port (phone) status: Green Slow-Flashing SIP user account for the analog line has been successfully registered to a proxy server Phone is in on-hook state ... -
Page 4: Cabling The Device
STATUS LED indicating operating status: Green On Device bootup completed successfully Green Flashing Firmware upgrade or configuration update in process (all other LEDs also flash, except POWER LED) Red On Device booting up POWER LED indicating power status: Green On Power received by device No power Cabling the Device... - Page 5 Configuring Initial Network Settings Once you have cabled the device, as explained in the previous section, you can access the device's Web-based management tool to configure your Internet connection type. On the computer that you connected to the device, verify that the Local Area Connection status is "Connected".
- Page 6 "WAN Ethernet" line.) Obtaining Software and Documentation If you have a maintenance and support agreement with AudioCodes or with an authorized AudioCodes Service Partner, you can download the device's latest software version from AudioCodes' Services Portal at https://services.audiocodes.com...
-
Page 7: Safety Precautions
Use only the supplied AC/DC power adapter for connection to the power source. In case of a malfunction, do not attempt to fix the power adapter and do not use any other type of power adapter. Contact AudioCodes support for assistance. The device must be connected to an electrical socket-outlet providing protective earthing. ... - Page 8 Website: https://www.audiocodes.com/ ©2019 AudioCodes Ltd. All rights reserved. AudioCodes, AC, HD VoIP, HD VoIP Sounds Better, IPmedia, Mediant, MediaPack, What’s Inside Matters, OSN, SmartTAP, User Management Pack, VMAS, VoIPerfect, VoIPerfectHD, Your Gateway To VoIP, 3GX, VocaNom, AudioCodes One Voice and CloudBond are trademarks or registered trademarks of AudioCodes Limited.