Figure 14-38: Personal Domain Name (Dynamic Dns) - Adding; Table 14-2: Dynamic Dns Parameter Descriptions - AudioCodes MP-20x User Manual

MP-20x Telephone Adapter

Figure 14-38: Personal Domain Name (Dynamic DNS) - Adding

3. Configure the DDNS parameters. Use the table below as a reference.
Parameter
Host Name
Connection
Provider
User Name
Password
Wildcard
Mail Exchanger
Version 3.0.1

Table 14-2: Dynamic DNS Parameter Descriptions

Enter your full DDNS domain name.
In a single WAN scenario, the connection parameter appears as static text
(non-configurable). However, if you have multiple WAN devices, a drop-
down list box appears, enabling you to select the connection to which you
would like to couple the DDNS service. The DDNS service only uses the
chosen device, unless fail-over is enabled. In this case, the failed-to device
is used instead (assuming its route rules consent), until the chosen device
is up again.
Select your DDNS service provider and then click the link Click here to
initiate and manage your subscription to open the selected provider's
account creation Web page. For example, when dyndns.org is selected, the
following page opens: http://www.dyndns.com/account.
Enter your DDNS user name.
Enter your DDNS password.
Select this check box to enable use of special links such as
www.<yourhost>.dyndns.org.
Enter your mail exchange server address to redirect all e-mails arriving at
your DDNS address to your mail server.
Description
239
14. Advanced Settings
July 2010