AudioCodes MP-20x User Manual page 268

Feature
Packetization
Security
Telephony Signaling
6
Wireless LAN
Hardware
Power
5
Not supported by MP-202C-A.
6
MP-202C-W model only.
MP-20x Telephone Adapter
Configuration file encryption (3DES)
SIP-triggered remote firmware and configuration upgrade
Command-Line Interface (CLI) over Telnet
Dual image management
5
SNMP
RTP/RTCP Packetization (RFC 3550, RFC 3551)
DTMF Relay (RFC 2833)
HTTPS for Web-based configuration
Password protected Web pages (MD5)
In-band:
DTMF: Detection and Generation, TIA464B
Caller ID: Telcordia, ETSI, NTT - Type I, Telcordia Type II
Call Progress Tones
Out-of-band:
FXS Loop-start Signaling
On/Off Hook, Flash Hook
Wireless LAN - 802.11b/g Wireless Access Point
Wireless Security:
RADIUS Server (802.1x/WPA Client Authentication)
WPA
WPA2
WPA/WEP Mixed Mode
TKIP Encryption
MAC Filtering
Operating frequency: 2.4 - 2.5 GHz
Nominal data transfer rate:
- 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11b: 1, 2, 5.5, 11 Mbps
Operating channels:
- 11 for North America
- 14 for Japan
- 13 for Europe (ETSI)
+12 VDC, 1A External Power Supply Adaptor, 110/220 VAC/50-60 Hz,
available in the following models:
MP202A-PS-NR-EU/RPSD10007: Power Supply 12VDC/1A Wall
Mount EU Type 220VAC; DC Plug 5.5 x 2.5 x 8 mm Straight; 1.5 m
cable with Ferrite bead
MP202A-PS-NR-US/RPSD10008: Power Supply 12VDC/1A Wall
Mount US Type 110VAC; DC Plug 5.5 x 2.5 x 8 mm Straight; 1.5 m
cable with Ferrite bead
MP202A-PS-WR-US/RPSD10012: Power Supply 12VDC/1A Wall
Mount US Type 100-240VAC; DC Plug 5.5 x 2.5 x 8 mm Straight;
268
Details
Document #: LTRT-50609
User's Manual