Example 3 - Configuring Voip And Data In The Same Vlan; Figure 11-43: Configuring Wan Ethernet; Figure 11-44: Voip And Data On Same Vlan - AudioCodes MP-20x User Manual

11.2.4.3 Example 3 - Configuring VoIP and Data in the Same VLAN

To configure VoIP and data in the same VLAN:
1. For VoIP and data, configure a VLAN ID and then configure each to 'Obtain IP
Address Automatically' (optionally, you can use a static IP address).
2. Define a new network bridge. Define it by selecting the check boxes of LAN Ethernet
and the new VLAN Interface that you defined.
3. Go to the regular WAN and change the mode to 'No IP Address'
MP-20x Telephone Adapter

Figure 11-43: Configuring WAN Ethernet

Figure 11-44: VoIP and Data on same VLAN

148
User's Manual
Document #: LTRT-50609