Settings Tab; Bridge Tab; Figure 11-29: Bridge Settings - AudioCodes MP-20x User Manual

11.2.2 Settings Tab

Refer to 'Settings Tab' on page 125.

11.2.3 Bridge Tab

The Bridging tab allows you to specify the LAN and WAN devices that you would like to
join under the network bridge. Click the icon Edit on the 'VLAN' column to assign the
network connections to specific Virtual LANs. Select the check box 'STP' to enable the
Spanning Tree Protocol on the device. You should use this to ensure that there are no
loops in your network configuration, and apply these settings if your network consists of
multiple switches, or other bridges apart from those created by the Telephone Adapter.
MP-20x Telephone Adapter

Figure 11-29: Bridge Settings

140
User's Manual
Document #: LTRT-50609