AudioCodes MP-20x User Manual page 208

Icon Name
Configuration
File
DNS Server
Diagnostics
Firmware
Upgrade
IP Address
Distribution
MAC Cloning
Network
Objects
PPPoE Relay
Personal
Domain Name
(Dynamic DNS)
Protocols
Reboot
Regional
Settings
Remote
Administration
Restore Factory
Settings
MP-20x Telephone Adapter
Load the Configuration File to MP-20x
Note: You can hide the Configuration File icon, by running the
following CLI command in a Telnet session with MP-20x:
rg_conf_set rmt_config/hide_config_file_page 1. This is useful, for
example, in scenarios where you want to prevent a user accessing
the Web interface to change the configuration file.
Alias a dynamic IP address to a static hostname
Perform networking diagnostics
Perform a Firmware Upgrade
Modify the behavior of the DHCP server for each LAN device and
view a list of DHCP clients in the local network
Clone MP-20x's MAC address.
Define groups of LAN devices for system rules.
Enable PPPoE relay on MP-20x.
View and modify the DNS Hosts table.
Manage protocols.
Restart MP-20x.
Change the regional settings.
Configure remote administration privileges.
Restore default factory settings.
208
Description
Document #: LTRT-50609
User's Manual