Configuring Signaling Protocol Parameters; Figure 5-1: Voip - Signaling Protocol - AudioCodes MP-20x User Manual

5.1

Configuring Signaling Protocol Parameters

Note:
To configure signaling protocol parameters:
1. From the left sidebar, click the Voice Over IP menu; the 'Signaling Protocol' tab
screen appears (by default).
2. Configure the desired parameters according to the table below, and then click OK.
MP-20x Telephone Adapter
In the current version release, only SIP (Session Initiation Protocol) is
supported.

Figure 5-1: VoIP - Signaling Protocol

38
User's Manual
Document #: LTRT-50609