Wireless Security; Figure 9-7: Configuring Wpa Security - AudioCodes MP-20x User Manual

MP-20x Telephone Adapter
9.3.2

Wireless Security

To define wireless security:
1. In the Wireless tab's screen, from the 'Security' drop-down list, select the type of
security protocol; the screen refreshes, presenting each protocol's configuration
respectively:
•
None: this option disables security on your wireless connection.
•
WPA: WPA is a data encryption method for 802.11 wireless LANs.
Configure the following fields:
a.
b.
c.
d.
e.
Version 3.0.1

Figure 9-7: Configuring WPA Security

Authentication Method: select the authentication method ('Pre-Shared Key'
and '802.1x') you would like to use.
Pre-Shared Key: this entry appears only if you selected this authentication
method. Enter your encryption key (using either an ASCII or a Hex value by
selecting the value type in the drop-down list provided.
Encryption Algorithm: select between 'TKIP' (Temporal Key Integrity
Protocol), 'AES' (Advanced Encryption Standard) or both ('TKIP and AES')
for the encryption algorithm.
Group Key Update Interval: select the check box, and then enter the time
interval in seconds for updating a group key.
Inter Client Privacy: select the check box to prevent communication
between the wireless network clients using the same access point. Clients
will not be able to view and access each other's shared directories.
93
9. LAN Wireless Connection
July 2010