Configuring Your Internet Connection; Figure 3-5: Internet Connection - Automatic Ip Address Ethernet Connection - AudioCodes MP-20x User Manual

In the 'Administrator' section of the 'Quick Setup' screen, specify the administrator's e-mail
in the 'E-mail Address' field. System alerts and notifications are sent to this address.
3.2.2.1

Configuring Your Internet Connection

When subscribing to a broadband service, you should be aware of the method by which
you are connected to the Internet. Technical information regarding the properties of your
Internet connection should be provided by your Internet Service Provider (ISP). For
example, your ISP should inform you whether you are connected to the Internet using a
static or dynamic IP address, or what protocols, such as PPTP or PPPoE, you will be using
to communicate over the Internet.
Note:
3.2.2.1.1 Automatic IP Address Ethernet Connection
'Automatic IP Address Ethernet Connection' is the default connection type in the
'Connection Type' drop-down list.

Figure 3-5: Internet Connection - Automatic IP Address Ethernet Connection

If left at the default, MP-20x obtains the WAN IP and DNS IP addresses from a DHCP
server on the WAN.
MP-20x Telephone Adapter
MP-20x supports automatic detection of the user's Internet dialer type and
allows you to ignore the settings in this subsection. For a detailed description
of this feature, refer to "Configuring Automatic Internet Dialer Detection" on
page 31.
26
User's Manual
Document #: LTRT-50609