Remote Mp-20X Telephone Adapter Management; Overview; Remote Configuration - AudioCodes MP-20x User Manual

MP-20x Telephone Adapter
12 Remote MP-20x Telephone Adapter
Management
MP-20x was designed to be mass-deployed by carriers and service providers. One of the
keys to guarantee end-user satisfaction and true toll-quality service in mass field
deployment is comprehensive remote configuration and management capabilities:
Automatic and remote configuration updates
Automatic and remote firmware updates
Remote diagnosis of problems reported by the user
Remote collection of statistical information regarding the quality of the service
Remote notifications of problems in the service
12.1

Overview

12.1.1 Remote Configuration

By default, MP-20x is provided with factory default settings, which are common to all MP-
20x devices (except for the MAC address). The factory settings allow the user to connect to
MP-20x's embedded Web server from the LAN interface.
By default, the WAN interface is configured for DHCP (i.e., automatically obtains its IP
address from a DHCP server). In the case of PPPoE or other Internet dialers, this default
configuration does not allow MP-20x to connect to the Internet. The default configuration
does not include any VoIP service provider settings (such as a SIP proxy).
In some cases, AudioCodes can ship MP-20x devices that are pre-configured with some
customer-specific parameters. This set of parameters is usually defined as the new "factory
settings" for this specific customer.
MP-20x's factory default settings and the current configuration running on MP-20x are
stored on MP-20x's non-volatile flash memory. The current configuration can be remotely
updated using several configuration interfaces:
HTTP-based Web server
SNMP
TR-069
Configuration file upload/download
Version 3.0.1

12. Remote MP-20x Telephone Adapter Management

151 July 2010