Security Concerns And Measures - AudioCodes MP-20x User Manual

TR-069/TR-104
Parameter
ServerDownTime
ReceivePacketLossRat
e
FarEndPacketLossRat
e
ReceiveInterarrivalJitte
r
FarEndInterarrivalJitte
r
RoundTripDelay
AverageReceiveInterar
rivalJitter
AverageFarEndInterarr
ivalJitter
AverageRoundTripDel
ay

12.2.2.3 Security Concerns and Measures

The CPE WAN Management Protocol is designed to allow a high degree of security in the
interactions that use it. The CPE WAN Management Protocol is designed to prevent
tampering with the transactions that take place between a CPE and ACS, provide
confidentiality for these transactions, and allow various levels of authentication.
The following security mechanisms are incorporated in this protocol:
The protocol supports the use of SSL/TLS for communications transport between CPE
and ACS. This provides transaction confidentiality, data integrity, and allows
certificate-based authentication between the CPE and ACS.
The HTTP layer provides an alternative means of CPE authentication based on
shared secrets.
MP-20x Telephone Adapter
Configuration File
Parameter
-
mt_voip_get_state(line,
state)
-
-
-
mt_voip_get_state
-
-
-
170
Description
The number of seconds MP-20x is unable to
maintain a connection to the server. Applies
only to SIP.
Current receive packet loss rate (in
percentage).
Current far-end receive packet lost rate (in
percentage).
Current receive interarrival jitter (in
microseconds).
Current Interarrival jitter (in microseconds)
as reported from the far-end device via
RTCP.
Current round-trip delay (in microseconds).
Average receive interarrival jitter (in
microseconds) since the beginning of the
current call.
Average far-end interarrival jitter (in
microseconds) since the beginning of the
current call.
Average round-trip delay (in microseconds)
since the beginning of the current call. This
is the average of the RoundTripDelay
statistics accumulated each time the delay is
calculated.
Document #: LTRT-50609
User's Manual