General; Ppp Configuration; Ppp Authentication; Ppp Encryption - AudioCodes MP-20x User Manual

MP-20x Telephone Adapter

10.3.2 General

This section displays the connection's general parameters.
Parameter
Schedule
Network
MTU

10.3.3 PPP Configuration

Refer to 'PPP Tab' on page 110.

10.3.4 PPP Authentication

Refer to 'PPP Tab' on page 110.

10.3.5 PPP Encryption

Refer to 'PPP Tab' on page 110.

10.3.6 Internet Protocol

Refer to 'Settings Tab' on page 106.
Version 3.0.1

Figure 10-13: General PPTP Settings

Table 10-8: General PPTP Settings

By default, the connection is always active. However, you can configure
scheduler rules (via Advanced>Scheduler Rules) in order to define time
segments during which the connection may be active. Once a scheduler rule(s)
is defined, this field changes to a drop-down list, allowing you to choose
between the available rules.
Select whether the parameters you are configuring relate to a WAN, LAN or
DMZ connection, by selecting the connection type from the drop-down list.
MTU is the Maximum Transmission Unit. It specifies the largest packet size
permitted for Internet transmission. When set to its default (Automatic), MP-20x
selects the best MTU for your Internet connection. Select 'Automatic by DHCP'
for the DHCP to determine the MTU. If you select 'Manual', it is recommended
to enter a value in the range of 1200 to 1500.
Description
117
10. WAN Settings
July 2010