AudioCodes MP-20x User Manual page 40

Parameter
Proxy Port
Maximum Number of
Authentication Retries
Use SIP Proxy IP and Port
for Registration
Register Expires
Register Failed Expires
SIP Security
Address Type
SIP Entity Address
Use Redundant Proxy
Redundant Proxy Address
Redundant Proxy Port
Redundant Proxy Keep Alive
Period
Switch back to Primary SIP
proxy when available
Use SIP Registrar
Registrar Address
Registrar Port
Use SIP Outbound Proxy
Outbound Proxy IP
MP-20x Telephone Adapter
The UDP or TCP port of the SIP proxy.
Defines how many times authenticated register messages are re-sent
if 401 or 407 responses with a different "nonce" are received.
Use the SIP proxy IP and port for registration. Default = checked.
When checked, there is no need to configure the address of the
registrar separately.
The registration timeout, in seconds.
Periodic registration in case of a registration failure (e.g., due to a
network problem).
MP-20x's firewall can be configured to block incoming packets that
have the SIP signaling port as their destination. You can configure up
to two SIP entities (for example, the SIP Proxy or an SBC), which are
not to be blocked by the firewall.
The default value is "Allow all SIP traffic".
Defines the address type of the additional SIP entity. It can be set to
"IP Address" or "Host Name".
Note: This parameter appears only if the parameter 'SIP Security' is
set to "Allow SIP traffic from Proxy and Additional SIP Entity".
The address of the additional SIP entity.
Note: This parameter appears only if the parameter 'SIP Security' is
set to "Allow SIP traffic from Proxy and Additional SIP Entity".
Check the box to use a redundant proxy.
The IP address of the redundant proxy.
The port of the redundant proxy.
The interval between keep-alive packets (SIP OPTIONS) which are
used by the proxy redundancy mechanism to check the connection
status.
When checked, the device switches back to the primary proxy server
when communication with it is returned.
Check the box to use a separate SIP registrar server.
The IP address or host name of the registrar server.
Note: This parameter appears only if Use SIP Registrar is selected.
The UDP or TCP port of the registrar server.
Note: This parameter appears only if Use SIP Registrar is selected.
Use an outbound SIP proxy (all SIP messages are sent to this server
as the first hop). Default = unchecked.
Note: This parameter appears only in 'Advanced' mode.
The IP address of the outbound Proxy. If this parameter is set, all
outgoing messages (including Registration messages) are sent to this
Proxy according to the Stack behavior.
Note: This parameter appears only if 'Use SIP Outbound Proxy' is
selected.
40
Description
Document #: LTRT-50609
User's Manual