MP-20x Telephone Adapter
11.1.5.1.5 Testing the 3-VLAN Setup
To test the 3-VLAN setup:
1.
Place a VOIP call. Verify that the VOIP is using 802.1q/p, that the VLAN ID is 300 and
that the IP is 3.3.x.x (refer to the screen shown below).
2.
Connect a PC to the LAN port of MP202 (1 or 2) and send traffic (ICMP). Verify that
the ICMP traffic is tagged (802.1q) and that it is using VLAN 521.
3.
Connect the management PC to VLAN 311 and verify that all management traffic is
carried in this VLAN.
Version 3.0.1
Figure 11-20: Testing the Setup
Figure 11-21: Testing the Setup
Figure 11-22: Testing the Setup
135
11. VLAN and Bridge Settings
July 2010