Configuring Speed Dial Settings; Figure 5-9: Voice Over Ip - Speed Dial Screen; Figure 5-10: Voip - Speed Dial Settings - AudioCodes MP-20x User Manual

5.7

Configuring Speed Dial Settings

Use the 'Speed Dial Settings' screen to associate a called party's contact parameters
(including the IP address of his/her ATA and Line ID) with a number that you'll dial to call
the called part. The number of speed-dialing codes that can be defined is unlimited. Use
the screen to define a destination type: Proxy, Local Line or Direct Call.
Note:
MP-20x's VoIP to a VoIP Service Provider' on page 65), you don't need to
configure 'Speed Dial Settings'.
To configure speed dialing:
1. In the 'Voice Over IP' screen, click the Speed Dial tab; the 'Speed Dial' screen opens.
Click New to add a new speed dial entry; the 'Speed Dial Settings' screen appears.
The figure below shows how a proxy speed dial is configured. The proxy IP address is
'Office' and number to speed-dial is 123.
MP-20x Telephone Adapter
When connecting MP-20x to a World-Wide SIP Server (refer to 'Connecting

Figure 5-9: Voice Over IP - Speed Dial Screen

Figure 5-10: VoIP - Speed Dial Settings

60
User's Manual
Document #: LTRT-50609