Removing memory module
To remove the memory module, make sure the computer is in boot
mode then:
1. Be sure the power is off, the battery is removed and all cables are
disconnected from the computer, then open the keyboard and
remove the modem board as described in the previous section.
2. Gently press out on the latches. One end of the module will pop up.
3. Grasp the module and pull it out.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
4. Install the modem board, then rotate the keyboard back into place
and secure the keyboard brace as described in the previous section.
5. Turn the computer upside down and replace the battery pack.
9-8 Optional Devices
Removing the memory module
User's Manual