Page 1
If you need assistance: ❖ InTouch Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 179 in this guide. TOSHIBA ® 2430/2435 ® Center “If Something Goes Wrong” on C6633-1202M1...
Page 2
If you fail to do so, this product may not function properly and you may lose data or suffer other damage. TOSHIBA AMERICA INFORMATION SYSTEMS (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE.
NOTE: Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's or expansion unit's serial port, parallel port, monitor port, USB port, ®...
Contact: Toshiba America Information Systems, Inc. 9740 Irvine Blvd. Irvine, CA 92618-1697 (949) 583-3000 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada.
FCC. In the event repairs are ever needed on your modem, they should be performed by Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba.
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
If you should experience any such problem, immediately turn off either one of your Bluetooth™ or Wireless LAN. Please contact Toshiba PC product support on web site http://www.toshiba- europe.com/computers/tnt/bluetooth.htm in Europe or http://www.pcsupport.global.toshiba.com in the United States for more information.
Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Page 9
België/ For outdoor usage only channel 10 (2457 MHz) and 11 (2462 MHz) is Belgique: allowed. For private usage outside buildings across public grounds over less than 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 10
Caution: Exposure to Radio Frequency Radiation The Toshiba Wireless LAN Mini PCI Card will be installed with one of two types of antennas. The both of antenna types, when installed are located at the upper edge of the LCD screen.
Page 11
Antenna(s) used in 5.15-5.25GHz frequency band must be integral antenna which provide no access to the end user. Refer to the Regulatory Statements as identified in the documentation that comes with those products for additional information. Relevant transmitters include FCC IDs: CJ6UPA3233WL, CJ6UPA3232BT.
Page 12
Using this equipment in Japan In Japan, the frequency bandwidth of 2,400.2,483.5MHz for second-generation low-power data communication systems such as this equipment overlaps that of mobile object identification systems (premises radio station and specified low- power radio station). 1. Sticker Please put the following sticker on devices incorporating this product.
3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916 Fax: 03-5444-9450 Device Authorization This device obtains the Technical Regulation Conformity Certification and the Technical Conditions Compliance Approval, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law and the Telecommunications Business Law of Japan.
Page 14
Toshiba is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this Toshiba Wireless LAN Mini PCI Card, or the substitution or attachment of connecting cables and equipment other than specified by Toshiba.
Page 15
This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 16
WinDVD is a trademark of InterVideo, Inc. CompuServe is a registered trademark of America Online, Inc. Dolby - Manufactured by Toshiba under license from Dolby Laboratories/ Dolby and the double-D symbol are trademarks of Dolby Laboratories. TouchPad is a trademark of Synaptics, Inc.
Contents Introduction ...25 This guide ... 25 Safety icons ... 26 Other icons used... 27 Other documentation ... 27 Service options ... 28 Chapter 1: Finding Your Way Around ... 29 Making sure you have everything ... 29 Front with the display closed ... 30 Back ...
Page 18
Keeping yourself comfortable ... 40 Precautions... 43 Setting up your computer ... 45 Setting up your software... 45 Registering your computer with Toshiba ... 47 Adding external devices ... 47 Connecting the AC adapter... 48 Charging the main battery... 50 Using the computer for the first time ...
Page 19
Chapter 3: Learning the Basics... 69 Computing tips ... 69 Using the keyboard ... 70 Character keys ... 71 Ctrl, Fn, and Alt keys ... 71 Function keys... 71 Windows Overlay keys... 72 Starting a program... 74 Saving your work ... 74 Printing your work ...
Page 20
Going into Stand by mode more quickly ... 95 Starting again from Stand by ... 96 Toshiba’s online resources... 96 Chapter 4: Mobile Computing ... 97 Toshiba’s energy-saver design ... 97 Running the computer on battery power ... 98 Power management ... 99 Charging the battery ... 99 Charging the RTC battery...
Page 21
Lesson 6: Starting programs ... 121 Lesson 7: Resizing, repositioning, and hiding windows ... 123 Using the taskbar ... 124 Minimizing and maximizing windows ... 124 Resizing and moving windows... 125 Lesson 8: Closing programs ... 126 Lesson 9: Creating shortcuts ... 127 Creating a shortcut to the Calculator...
Page 22
Contents Transferring files using a parallel port Getting help transferring files... 152 Connecting to the Internet ... 152 An overview of using the Internet ... 153 The Internet ... 153 The World Wide Web ... 154 Internet Service Providers... 154 Signing up with an Internet Service Provider 154 Surfing the Internet...
Page 23
Develop good computing habits ... 209 If you need further assistance... 210 Before you call ... 210 Contacting Toshiba ... 211 Other Toshiba Internet Web sites ... 212 ® operating system is not working . 183 ® XP operating system can help you ...
Page 24
Contents Toshiba’s worldwide offices ... 212 Appendix A: Hot Keys ... 215 Instant password security... 215 Without a password ... 215 With a password ... 215 Maintaining security when the battery isn’t fully Sound ... 217 Power usage mode ... 217 Stand by mode...
Your operating system offers exciting features and easy Internet access. This guide contains information about your operating system and how it functions with your Toshiba computer. For specific information on the software, see the Microsoft booklet that shipped with your computer.
Introduction Safety icons If you are new to computers, or have not used a notebook computer before, read through the first couple of chapters to familiarize yourself with the components of the computer and how to turn it on. After that, seek out whatever interests you most. Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal...
Guides for other programs that may come preinstalled on your computer or that are available for installation on your Recovery CDs. ❖ For accessory information, visit Toshiba's web site at toshiba.com. ❖ The Microsoft which explains the features of the operating system.
Introduction Service options Service options Toshiba offers a full line of service options built around its SelectServ Toshiba’s Web site at If you have a problem or need to contact Toshiba, see Something Goes Wrong” on page warranty programs. For more information, visit toshiba.com...
Chapter 1 Finding Your Way Around This chapter presents a “grand tour” of your notebook computer. It serves as a reference when you need to locate specific parts of the computer. Making sure you have everything Before doing anything else, consult the Quick Start card provided with your system to make sure you received everything.
Finding Your Way Around Front with the display closed Front with the display closed CD/DVD control buttons The display latch keeps the display panel closed and locked. To open the display panel, press the display latch and raise the panel. The CD/DVD control buttons let you play audio CDs when the computer is turned off.
Page 31
The RGB (monitor) port lets you connect an external monitor. The parallel port lets you connect a parallel printer or other parallel device, including ECP-compatible devices. The modem port lets you use a standard RJ-11 telephone cable to connect the modem directly to a standard telephone line.
Finding Your Way Around Right side Right side USB Port i.LINK Speaker PC Card eject buttons The two stacked PC Card slots support up to two Type I or Type II PC Cards, or one Type III PC Card. See Cards”...
Left side Line In jack Wireless antenna indicator Wireless antenna on/off switch* Security lock slot The 3.5 mm headphone jack lets you connect stereo headphones or other audio-output devices, such as external speakers. Connecting other devices automatically disables the internal speakers. The 3.5 mm microphone jack lets you connect an external monaural microphone or other audio input device.
The power button turns the computer on and off. Holding down the power button for four seconds resets the computer. The Internet button launches your default Internet browser. The TOSHIBA Console button allows quick access to various functions. System indicator panel “Exploring video features”...
Page 35
Finding Your Way Around Front with the display open The One Touch TV out button activates an external display device such as a TV when connected to the video/audio line out jack. The 85-key keyboard provides all the functionality of a full- size keyboard.
Finding Your Way Around Front with the display open Indicator lights Mode Digital Digital Mode The CD mode light goes on in CD mode when the computer is playing a CD with the computer off. The digital mode light goes on in digital mode, when the computer is playing a CD or DVD with the computer on.
The cursor control mode light glows when the cursor control overlay is on. When this light is on, pressing an overlay key moves the cursor in the direction of the white arrow printed on the key instead of typing the letter printed on the top of the key.
Page 38
Finding Your Way Around Underside The Modular Bay lets you use one of several possible Modular Bay optical drive modules. A DVD-ROM drive is shown in place. For more information, see Modular Bay” on page The expansion memory slot cover protects the two expansion memory slots where you insert additional memory.
Chapter 2 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
AC power source, and let it dry out completely before turning it on again. If the computer does not operate correctly after you turn it back on, contact a Toshiba authorized service provider. Keeping yourself comfortable Strain and stress injuries are becoming more common as people spend more time using their computers.
Page 41
❖ If you are using an external monitor, the top of the display should be no higher than eye level. ❖ If you use a paper holder, set it at about the same height and distance as the screen. Seating and posture When using your computer, maintain good posture with your body relaxed and your weight distributed evenly.
Page 42
Getting Started Selecting a place to work ❖ Adjust the back of your chair so that it supports the lower curve of your spine. If necessary, use a cushion to provide extra back support. Lower-back-support cushions are available at many office supply stores. ❖...
Work habits The key to avoiding discomfort or injury from strain is to vary your activities. If possible, schedule a variety of tasks into your working day. Finding ways to break up the routine can reduce stress and improve your efficiency. ❖...
Page 44
Getting Started Selecting a place to work ❖ Some PC Cards can become hot with prolonged use. If two cards are installed, both can become hot even if only one is being used. Overheating of a PC Card can result in errors or instability in its operation.
Setting up your computer TECHNICAL NOTE: You must complete all set up steps up to “Setting up your software” on page 45 internal components to your computer. These components include, but are not limited to, a mouse, keyboard, printer, memory, and PC cards. Your computer contains a rechargeable high-capacity battery that needs to be charged before you can use it.
Page 46
Toshiba and Microsoft. Click Yes to register, or No to exit the process. NOTE: If you click No, you may register with Toshiba by clicking the Register with Toshiba icon on the desktop. If you selected Yes in step 5, enter your personal information in the registration window.
Toshiba warranty worldwide at no charge to you. You can register your computer with Toshiba during the start-up process or by clicking on the icon on the desktop at a later time.
CAUTION: Use only the AC adapter supplied with your computer or an equivalent adapter that is compatible. Use of any incompatible adapter could damage your computer. Toshiba assumes no liability for any damage caused by use of an incompatible adapter.
Page 49
To connect AC power to the computer: Connect the power cable to the AC adapter. Connecting the power cable to the AC adapter Plug the AC adapter into the DC-IN on the back of the computer. Connecting the AC adapter to the computer Connect the power cable to a live electrical outlet.
Getting Started Charging the main battery Charging the main battery To charge the main battery, plug the computer into a live wall outlet. It takes several hours to charge the battery with the computer off. It takes much longer to charge the battery while the computer is on.
Using the computer for the first time Opening the display panel Press the display latch and lift the display panel Opening the display panel CAUTION: To avoid damaging the display panel, don’t force it beyond the point where it moves easily. Never lift or move the computer using the display panel.
Getting Started Using the computer for the first time The AC power indicator glows when the computer is connected to an external power source. The battery light: ❖ Glows amber while the battery is being charged. ❖ Glows green when the battery is fully charged. ❖...
❖ To move it to the left side, slide your finger from right to left. NOTE: Because the TouchPad is much smaller than the display screen, moving your cursor across the screen often means having to move your finger several times across the TouchPad in the preferred direction.
Getting Started Installing additional memory (optional) Click the TouchPAD ON/OFF tab. The TouchPAD ON/OFF tab view window appears. Select Disable or Enable, whichever is appropriate. Click Apply. Click OK. The Mouse Properties window closes. Close the Printers and Other Hardware window. Close the Control Panel window.
Page 55
Additional memory comes in various capacities (visit Toshiba’s website at There are two memory slots. Your system may have both slots occupied. CAUTION: If you use the computer for a long time, the memory modules will become hot.
Page 56
Getting Started Installing additional memory (optional) Memory slot cover Base of a Satellite 2430/2435 computer Using a standard Phillips no. 1 screwdriver, unscrew the two screws that secure the expansion memory slot cover, then remove the memory slot cover. Removing the memory slot cover...
Page 57
Installing additional memory (optional) Put the screws and the cover in a safe place so that you can retrieve them later. CAUTION: Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.
Page 58
Getting Started Installing additional memory (optional) The following figure shows the inside of the memory compartment. Viewing the inside of the memory compartment Remove the memory module from its antistatic packaging. Holding the memory module by its edges so that the gold connector bar faces the slot, fit the module into the socket.
Page 59
Installing additional memory (optional) If you removed the Wi-Fi module, reinstall it by reversing the steps in step 6 and referring to the following figures. Replacing the Optional Wi-Fi Module and reconnecting the antenna wires Replace the expansion memory slot cover. Replace the screws and tighten them.
Getting Started Installing additional memory (optional) Removing a memory module Follow steps 1 through 6 in memory (optional)” on page Gently push the memory locks outward until the memory module pops up. Removing the memory module Gently pull the memory module diagonally to pull it out of the slot.
Connecting a printer NOTE: Read the documentation that came with your printer. Follow the manufacturer’s instructions when connecting a local printer. NOTE: You must supply the proper printer cable. If one did not come with your printer, you may purchase one from an electronics or computer store.
Getting Started Installing additional memory (optional) Plug the printer’s power cable into a live AC outlet. To connect a parallel printer: CAUTION: Connecting the parallel printer cable while the computer is on may damage the printer, the computer, or both. Connect the printer cable to the printer and to the computer’s parallel port.
Page 63
Installing additional memory (optional) The Printers and Faxes window appears. Sample Printers and Faxes window Click Add Printer. The Add Printer Wizard starts. Sample Add Printer Wizard Getting Started...
Page 64
Getting Started Installing additional memory (optional) Click Next. The Add Printer Wizard asks you to select your printer. TECHNICAL NOTE: If your printer is Plug and Play, the operating system recognizes it automatically. You can ignore the remainder of this section. See your printer manual. If the printer you are setting up: ❖...
Click Next. The operating system prompts you to print a test page. If your printer is connected and turned on, click Next. To complete the setup procedure without printing a test page, click No, then click Next. Click Finish. You are now ready to print. Depending on your program, you may see various messages indicating the status of your print job.
Cleaning the computer To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth. Ask your Toshiba dealer for suggestions for appropriate cleaning products. CAUTION: Keep liquid, including cleaning fluid, out of the computer’s keyboard, speaker grille, and other openings.
You can purchase a carrying case from your Toshiba dealer or visit Toshiba’s Web site at Using a computer lock You may want to secure your computer to a heavy object such as your desk.
Page 68
Getting Started Caring for your computer The computer is now securely locked to deter computer theft. Locking the computer...
Chapter 3 Learning the Basics This chapter lists some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work temporarily stays in the computer’s memory until you save it to the disk. You will lose all unsaved work, if, for example, a system error occurs and you must restart your computer, or your battery runs out of charge while you are working.
Learning the Basics Using the keyboard ❖ Back up your files to storage media on a regular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy.
Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖ The spacebar creates a space character instead of just passing over an area of the page. ❖ The lowercase l (el) and the number 1 are not interchangeable.
Learning the Basics Using the keyboard Windows special keys ® ® Windows special keys The keyboard provides two keys that have special functions in the operating system: ❖ The Windows ❖ The Application key has the same function as the secondary TouchPad control button (or secondary mouse button).
Page 73
Using the numeric keypad overlay To turn on the numeric keypad overlay, press simultaneously. The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on. You can still use the overlay keys to type alphabetic characters while the numeric overlay is on.
Learning the Basics Starting a program To turn off the cursor control overlay, hold down the and press keyboard indicator panel goes out. Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use My Computer or Windows Explorer.
To save: ❖ A file you are updating, open the program’s File menu and click Save. ❖ A new file, choose Save As from the File menu, type a name for the file, and click OK. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.
Learning the Basics Backing up your files Backing up your files Backing up your files means copying individual files to media, such as CD, or copying entire sections of your hard disk to another device, such as a tape drive. For those systems with a floppy disk drive, you may back up file to a floppy disk as follows: To back up to a CD or other media, insert the media into...
Using the DVD-ROM or Multifunction drive drive or Multifunction drive. HINT: Your DVD-ROM or Multifunction drive is designed to play region 1 (North America) DVD-ROMs. NOTE: For optimum DVD performance, it is recommended that you play DVDs while running the computer on AC power. You use CD-ROMs to load and run software, and to access reference material such as catalogs, as well as listen to music.
Learning the Basics Using the DVD-ROM or Multifunction drive CAUTION: Never press the eject button or turn off the computer while the drive-in-use indicator light is glowing. Doing so could damage the disc or the drive. The eject button requires power to operate. The manual eject button does not require power.
Using the DVD-ROM or Multifunction drive holding the mode button for four seconds. When the mode button is locked, you cannot switch between the CD/DVD and digital audio modes. To unlock the mode button, press and hold it for four seconds. The previous track button returns to the preceding track on the disc.
Learning the Basics Using the DVD-ROM or Multifunction drive Power is off and you press Play/Pause Operating system is running and you press Play/Pause Inserting a disc WARNING: Before playing an audio CD, turn the volume down. Playing the compact disc at maximum volume could damage your ears.
Page 81
Using the DVD-ROM or Multifunction drive The disc tray partially opens. CAUTION: To avoid damaging a disc or losing data, check that the disc activity light is off before opening the disc tray. Grasp the disc tray and pull it fully open. Hold the disc by its edges and check that it is clean and free of dust.
Learning the Basics Using the DVD-ROM or Multifunction drive Gently press the center of the disc onto the spindle until it locks into place. Spindle Disc Positioning the disc on the spindle CAUTION: Make sure the disc is properly positioned on the spindle.
Page 83
Using the DVD-ROM or Multifunction drive The Windows Media Player window appears. Rewind Play Stop Previous track Next track Mute Sample Windows Media The Windows Media an ordinary compact disc player: ❖ To play the CD or to pause, click the Play/Pause button on the CD Player control panel.
Learning the Basics Using the DVD-ROM or Multifunction drive Playing a DVD This manual has an entire chapter devoted to using WinDVD. For information about how to play back a DVD, see DVDs” on page Viewing the contents of a CD or DVD CDs and DVDs contain files just like the hard disk.
Using the DVD-ROM or Multifunction drive Removing a disc with the computer off Insert a slender object, such as a straightened paper clip, into the manual eject button access hole. CAUTION: Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.
Your computer comes with a built-in modem. To use the modem, you must connect it to a standard voice-grade RJ-11 telephone line. For more information regarding your computer’s modem, visit Toshiba’s web site at toshiba.com. Attach one end of a standard RJ-11 telephone cable to the modem port.
To use a dial-up connection, have your network administrator configure your computer for the network and supply you with the telephone number for the dial-up connection. To set up the network connection, use the Dial-Up Networking Wizard: Click Start and point to All Programs. Point to Accessories, then to Communications.
Learning the Basics Using Turn Off or Shut down or receive the files while you are asleep. This option is called Auto Power On. TECHNICAL NOTES: Before using any of these options to power down your computer, save your files and make sure the disk activity lights are off.
Select Shut down from the drop-down list. Click OK. The computer shuts down completely. NOTE: Holding the shift key while the Turn Off computer Windows dialog box is open, changes the Stand By button to hibernate. For more information about setting up hibernation command”...
Learning the Basics Using Turn Off or Shut down ❖ When starting up again, the computer returns to the state in which you left it, including all open programs and files you were using. For more information about the Hibernation command, see “Using Hibernation”...
You can also turn off the computer by pressing the power button or closing the display panel. To use either of these methods, you first need to turn on the feature in the Toshiba Power Management Utility. Click Start, Control Panel, then Performance and Maintenance.
Learning the Basics Using Hibernation Starting again after Turn Off To start the computer up again, press and release the power button. The on/off light turns on. Using Hibernation Follow these steps to power down the computer using Hibernation: Click Start, select Turn off computer. The Turn off computer dialog box appears.
Page 93
Click Start, Control Panel, then Performance and Maintenance. Double-click the Toshiba Power Management icon. Click the Advanced tab, and select the options you want. ❖ When I press the power button...
Learning the Basics Using Stand by Starting again from Hibernation mode To start the computer from Hibernation mode, press and release the power button. The computer returns to the screen you were using. If you put the computer in Hibernation mode by closing the display panel, you can start it again by opening the display panel.
Toshiba’s Power Saver utility. Open the Start menu, then click Control Panel. Click the Performance and Maintenance icon, and then click the Toshiba Power Management icon. Click the Advanced tab. Select Stand By for the options you want. When I press the power button Set this option to Stand By to put the computer into Stand by mode when you press the power button.
Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions, and keep you up to date with future upgrades.
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while...
This is normal for all batteries. To purchase a new battery pack, see your accessories information that shipped with your computer, or visit the Toshiba Web site at: toshiba.com. To ensure that the battery maintains its maximum capacity, operate the computer on battery power at least once a month until the battery is fully discharged.
Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s InTouch Center. Charging the battery NOTE: Battery charge time may vary depending on the applications, power management settings, and features used.
Mobile Computing Charging the battery To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degrees Celsius). ❖ The battery is almost completely discharged. Leave the power connected, and the battery should begin charging after a few minutes.
Click Start, Control Panel, then Performance and Maintenance. Double-click the Toshiba Power Management icon. The current power source and battery power remaining section displays the current charge state of the battery. The value displays as a percentage of remaining battery charge.
Mobile Computing Monitoring battery power Click the Battery Power Meter tab. Sample Toshiba Power Management Battery Power Meter tab TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit.
Toshiba’s power-saving options greatly increase the length of time you can use the computer before it becomes necessary to recharge the battery. Toshiba has combined these options into preset power usage modes. What to do when the battery runs low When the battery runs low you can ❖...
To set an alarm: Click Start, Control Panel, then Performance and Maintenance. Double-click the Toshiba Power Management icon. Click the Alarm tab and set the alarm, as desired. Sample Toshiba Power Management Alarm tab...
Changing the main battery When your battery power is running low, you have two options—connect the computer to an AC power source or install a charged battery. CAUTION: When handling a battery, be careful not to drop it or short-circuit its terminals. Removing the battery from the computer Save your work.
Mobile Computing Taking care of your battery While still holding the release latch in the open position life the battery pack out of the computer. Removing the battery WARNING: If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately following the advice in Taking care of your battery...
Use protective gloves when handling a damaged battery. ❖ To replace the main battery, use an identical battery that you can purchase through toshiba.com. ❖ Reverse Polarity should be avoided with all batteries. The main battery is designed so that it cannot be installed in reverse polarity.
Page 108
Mobile Computing Taking care of your battery flashes or there is some other warning to indicate a low battery, go to step 4. Connect the AC adapter to the computer and the power cord to a power outlet. The DC-IN or AC power-light LED should glow green, and the Battery LED should glow amber to indicate that the battery pack is being charged.
Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by Toshiba. The materials that came with your computer may include an insert regarding the disposal of batteries. If not, check with your local government agency for information on where to recycle or dispose of old batteries.
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cables, and compact discs. Contact your authorized Toshiba representative for more information.
Chapter 5 Getting to Know the Windows System This chapter introduces the Windows by guiding you through a few basic tasks. If you have used a Windows will find the Windows Whether you have used a Windows the skill and confidence you will gain from this chapter will more than offset the short amount of time spent going through these lessons.
Getting to Know the Windows ® XP Operating System Lesson 1: Exploring the desktop Lesson 1: Exploring the desktop The desktop is the launching pad for everything you can do in the Windows start programs, find documents, set up system components, and perform most other computing tasks.
Page 113
The icons initially displayed on your system desktop include: Toshiba Access—Opens a window with links to software updates, services and support, and other important benefits. Recycle Bin—Holds files you’ve deleted using the Windows Explorer.
Getting to Know the Windows ® XP Operating System Lesson 1: Exploring the desktop you open. You can use these buttons to quickly switch between the programs or windows. To make a program or window the active one, click the program’s or window’s button on the taskbar.
Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together For more information, read the Microsoft documentation that comes with your computer. Lesson 2: Using the TouchPad and control buttons together The “Getting Started” chapter introduced you to the TouchPad, which is your basic tool for moving around the screen.
Page 116
Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together With the pointer in an empty area of the desktop, click the secondary button (the right-hand button) to open the desktop shortcut menu. As the name implies, shortcut menus provide quick access to many operating system features.
Page 117
Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together NOTE: If the taskbar is locked, you need to unlock it. To unlock the taskbar, place the cursor on the taskbar and click the secondary button.
Getting to Know the Windows ® XP Operating System Lesson 3: Learning about the Internet Lesson 3: Learning about the Internet This lesson demonstrates how to access a Web page from a window and from the taskbar. The lesson assumes you have an account with an Internet Service Provider (ISP).
Getting to Know the Windows ® XP Operating System Lesson 4: Creating a new document This lesson teaches you how to create a text file without having to first open a program. Move the pointer to an empty area of the desktop, then click the secondary button.
Getting to Know the Windows ® XP Operating System Lesson 5: Creating a new folder Notice that when the document opens, there is a new button on the taskbar that reads My New Doc- Notepad (the name may be too long to fit into the taskbar space but, if you point to the name, the complete name is visible).
Getting to Know the Windows ® XP Operating System The operating system displays the document as an icon on the desktop. Click the document icon and drag it toward your New Folder icon. Position the document icon over the New Folder icon until it changes color, then release the primary button.
Page 122
Getting to Know the Windows ® XP Operating System Lesson 6: Starting programs Sample Paint window To open the second program, click Start, then click All Programs. Point to Accessories, then click Windows Explorer. The operating system opens Windows Explorer, which provides access to all your computer’s resources.
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Sample Windows Explorer window Notice the taskbar now has two buttons on it—one for Paint and one for Windows Explorer. Click the Paint button on the taskbar. The operating system displays the Paint program.
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows This lesson introduces several ways to adjust the size, shape, and position of windows open on the desktop. Using the taskbar If you have applications open on the desktop, you can rearrange them by pointing to the taskbar using the TouchPad and clicking the secondary button.
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Click the Maximize button in the top-right corner of the Paint window. The Paint window expands to fill the screen, hiding everything except the taskbar. Notice that the Maximize button has changed.
Getting to Know the Windows ® XP Operating System Lesson 8: Closing programs Repeat steps Windows Explorer, placing it on the right side of the desktop. Now that the windows are side by side, you can see how you could refer to one window while working in the other.
Getting to Know the Windows ® XP Operating System This lesson teaches you how to close the programs you opened earlier in this tutorial. To close the programs: Click the Close button at the top-right of the Explorer window. Windows Explorer closes, removing the Explorer button from the taskbar as well.
Getting to Know the Windows ® XP Operating System Lesson 9: Creating shortcuts Sample Create Shortcut dialog box In the Command line box, type and click Next. The operating system prompts you to select a name for the shortcut. Type Calculator The operating system displays the new shortcut on your desktop.
Page 129
Getting to Know the Windows ® XP Operating System Sample Search options on the Start menu Click All Files and Folders. The operating system displays the Search Results dialog box. Sample Search Results dialog box Lesson 9: Creating shortcuts...
Getting to Know the Windows ® XP Operating System Lesson 10: Changing the screen saver HINT: Search also allows you to perform searches on the Internet. Type char and then click Search. The operating system displays a list of all the files with “char”...
Page 131
Getting to Know the Windows ® XP Operating System Lesson 10: Changing the screen saver of these properties can be customized to meet your particular needs and tastes. DEFINITION: An object is an independent block of data, text, or graphics that was created by an individual application. This lesson introduces object properties by showing you how to change one of the properties of the desktop—the screen saver.
Getting to Know the Windows ® XP Operating System Lesson 11: Setting the date and time Scroll through the screen saver options by clicking the scroll arrows in the list box. Try a screen saver pattern by clicking a name in the list box.
Page 133
Getting to Know the Windows ® XP Operating System Lesson 11: Setting the date and time Sample Date and Time Properties dialog box HINT: To open the Date and Time Properties dialog box more quickly, either click the time display on the taskbar with the secondary button, then click Adjust Date and Time, or double- click the time display.
Getting to Know the Windows ® XP Operating System Lesson 12: Removing objects from the desktop Lesson 12: Removing objects from the desktop Earlier in this tutorial, you created a new icon on the desktop. Since everything you have done to this point has been just practice, you may want to return the desktop back to its original uncluttered state.
Page 135
Getting to Know the Windows ® XP Operating System Lesson 12: Removing objects from the desktop Sample Recycle Bin open on the desktop To completely remove an object, select it, and then click File, Delete. The object is permanently deleted from the Recycle Bin. Later on—in your real work, not in this tutorial—you will use the Recycle Bin to delete other objects such as folders, documents, and sometimes even programs.
Getting to Know the Windows ® XP Operating System Lesson 13: Using System Restore To delete everything from the Recycle Bin at once, choose Empty Recycle Bin from the File menu. Click Yes to confirm that you are sure. HINT: Empty the Recycle Bin periodically. Even though an item is moved to the Recycle Bin, it still uses valuable space on the hard disk drive until it is deleted from the Recycle Bin.
Getting to Know the Windows ® XP Operating System The operating system guides you through the process of storing your system settings for future use. It also guides you through restoring your system to the selected date or time. Lesson 14: If I am lost, what do I do? This lesson teaches you how to use some of the Help and Support features in Windows ®...
Page 138
Getting to Know the Windows ® XP Operating System Lesson 14: If I am lost, what do I do? The left side of the screen contains the index. The text box above the index, where the cursor is flashing, lets you type in a topic you want to find in the index.
Getting to Know the Windows ® XP Operating System program to look at it while you read about the program in the Help topic. Using the online tours and tutorials Whether you are new to computers or you have some experience, the Windows is a good place to start.
Getting to Know the Windows ® XP Operating System Lesson 15: Turning off your computer Lesson 15: Turning off your computer It is very important that you let the Windows system shut down your computer. As it shuts down, the operating system performs a number of tasks that ensure that everything is in place the next time you turn on the computer.
Chapter 6 Exploring Your Options In this chapter, you will explore other features of your notebook computer. ® Windows XP special features The Windows features and enhancements, including: ❖ New system file protection ❖ A system restore function, allowing you to rollback the system to its previous mode ❖...
Exploring Your Options Personalizing your desktop Personalizing your desktop Your desktop is your virtual workspace. This section explains how to customize its features for the way you like to work. You can customize the following aspects of the desktop: ❖ Taskbar—which resources to display for quick access ❖...
Bringing the world to your desktop With the Windows desktop with complete World Wide Web integration at a single click. Turning on the Web content interface The first step to bring active content to your desktop is to turn on the Web content interface: Point to an empty space on the desktop and click the secondary button.
Exploring Your Options Personalizing your desktop To browse the Gallery for more components to add, click Visit Gallery. In order to browse, an active Internet connection must be established. To select some other Web site, type the address of the Web site you want or click Browse to locate it.
The My Computer window appears. Select the Tools menu, then click Folder Options. The Folder Options dialog box appears. Sample Folder Options dialog box Click the preferred options. Click Apply, then OK. Personalizing individual windows Just as you can display a Web page on your desktop, you can also display a Web page in an individual window.
Exploring Your Options Personalizing your desktop Customizing window toolbars You can display one or more customizable toolbars at the top of a window. As you browse, the operating system detects the kind of information presented in the window and automatically displays the appropriate toolbar buttons and menus.
The elements you can add to the top of the window are: Toolbar element Address Bar Standard buttons Displays buttons for commonly used Displaying a toolbar in a window Click Start, then click My Computer. The My Computer window appears. On the View menu, point to Toolbars, then click the name of the toolbar you want to display.
Exploring Your Options Using your computer at the office Open the folder you want to view as a Web page. In the Tools menu, select Folder Options. In the Tasks section, click the button for Show common tasks in folders. Click Apply, then OK.
Setting up for communications To connect to the Internet, use an online service, or communicate across the telephone lines with another computer, you need: ❖ A modem (one comes with your computer) ❖ A telephone line ❖ A browser or communications program ❖...
Exploring Your Options Using your computer at the office To verify that the modem is set up properly, double-click the COM port to which your modem is connected. The Modem AMR Properties box appears. In the device status area, the computer should indicate whether the modem is working properly.
❖ Set up a home or small office network ❖ Set up an advanced connection Click Next and follow the directions on the screen. The computer connects to the network. Exchanging data with another computer To transfer a large amount of information between computers, you need a physical connection and a synchronization program.
Exploring Your Options Connecting to the Internet Getting help transferring files Click Start, then Help and Support. The Help and Support window appears. Click the Index button. In the dialog box, type Follow the online guide instructions. Connecting to the Internet To connect to the Internet you may need: ❖...
Using a modem If you’re using a modem, you connect the modem to one of the computer’s COM (communications) ports. The default setting for the modem is COM3. If you are having trouble connecting through the modem, you may need to determine the current COM port name and possibly change it.
Exploring Your Options An overview of using the Internet The World Wide Web The World Wide Web (or ‘Web’) is a subset of the Internet — a collection of interlinked documents (located on computers connected to the Internet) that work together using a specific Internet protocol called Hypertext Transfer Protocol (HTTP).
Surfing the Internet Once connected to the Internet, the Web browser displays a home page, for example, your ISP’s home page on the Internet or your company’s Web site home page. To visit a desired Web site, type in the Web address. The Web address, or Uniform Resource Locator (URL), is a unique identifier for that computer system linked to the Internet.
Exploring Your Options An overview of using the Internet ❖ Internet news groups A news group is similar to a chat room, but instead of using a dedicated site to converse about a specialized subject with others in real-time, it uses a Web site as a clearinghouse where all the messages are placed, like a gigantic bulletin board.
Exploring video features Your computer’s video features provide the viewing of presentations or DVD movies on the computer screen. TECHNICAL NOTE: Video CD playback capability is not enabled on all systems. HINT: There are no menus for Video CD 1.0 titles. For more information about using WinDVD, see “WinDVD™”...
Exploring Your Options Exploring audio features Click the Settings tab. Slide the Screen area slider bar toward Less until the setting reads 800 x 600, then click Apply. The screen blinks momentarily while the settings are adjusted. The Monitor Settings window appears and asks if you want to keep the settings.
to the microphone jack and using the Sound Recorder feature in the operating system. DEFINITION: A .wav (pronounced “wave”) file is a format for storing sound in files. TECHNICAL NOTE: If you record MP3 files, you will only be able to play them on a drive capable of playing MP3 files.
Exploring Your Options Exploring audio features When you have finished recording, click the Stop button. To hear what you just recorded, click the Play button. To save the file, select Save from the File menu. Adjusting recording settings The better the quality of the recording, the more disk space the sound file requires.
Connecting a monitor, keyboard and mouse To play back sound files through external speakers or headphones: Locate the headphone jack on the left side of the computer. Using any necessary adapters, plug the cable from the headphones or external speakers into the headphone jack. The headphone jack requires a 16-ohm stereo mini-jack.
Exploring Your Options Using the Modular Bay Using the Modular Bay The Modular Bay gives you additional flexibility. By inserting and removing Modular Bay modules, you can configure your computer for the task at hand without having to carry unnecessary components with you when you travel. HINT: Items from this list that did not come with your computer can be purchased separately.
Exploring Your Options Using the Modular Bay Unlatching the Modular Bay Slide the module out of the computer. Sliding the module out Inserting a module into the Modular Bay To install a module into the Modular Bay, simply slide the module all the way into the Modular Bay.
Exploring Your Options Using PC Cards Using PC Cards PC Cards expand your computer’s capabilities and usefulness. You can purchase additional PC Cards from your dealer. Most PC Cards conform to the PCMCIA (Personal Computer Memory Card International Association) standard. Your computer has two stacked PC Card slots and supports three types of PC Cards: ❖...
To insert a PC Card: Turn off the computer. You may also hot swap a PC Card. Stop the PC Card by clicking the Safely Remove Hardware icon on the System tray. After the Safe to Remove Hardware message appears, it is safe to remove the PC Card.
Exploring Your Options Using PC Cards Hot swapping One of the great things about PC Cards is that you can replace one PC Card with another while the computer is on. This is called “hot swapping.” Hot swapping precautions Although you can insert a PC Card at any time, to avoid data loss never remove a card while it is in use.
Chapter 7 WinDVD ™ WinDVD is a software program for playing DVDs. This chapter explains how to use this program. Playing DVDs TECHNICAL NOTE: For optimum DVD performance, play DVDs while your computer is connected to AC power. For systems with a DVD-ROM or DVD-R/RW drive, you can use WinDVD to play DVDs.
Page 168
WinDVD™ Sample DVD Drive Window NOTE: If you wish to have WinDVD run automatically, select Play DVD movie using WinDVD, then select the Always do the selected action checkbox. This checkbox is unchecked by default. To open WinDVD manually: Click Start, and point to All Programs. Point to InterVideo WinDVD, then click InterVideo WinDVD.
Page 169
WinDVD™ Sample WinDVD video window with the control panel Using the WinDVD slider bar (location) The slider bar enables you to move forward or backward through the DVD content. Move the slider bar to the left to go backward or move it to the right to go forward.
WinDVD™ Using the WinDVD control panel The WinDVD control panel resembles the control panel of a standard home DVD player. TECHNICAL NOTE: The DVD author determines what features the DVD supports. Depending on the DVD format and your computer’s hardware configuration, some of the control panel features may be unavailable when playing a DVD.
Page 171
From the WinDVD control panel, you can open an expanded control panel by clicking the expanded controls button. The expanded control panel contains several advanced features. “Using WinDVD Advanced Features” on page 174 explanation of these features. Using the control panel playback buttons Once you have inserted a DVD and started WinDVD, you are ready to play the disc.
Page 172
WinDVD™ Click this To do this Volume — click and drag the slider up to increase vol- ume and down to decrease volume. Speed Ring — enables you to control the speed at which the DVD plays. Move the slider upward to play the movie in fast forward.
Page 173
Click this To do this Previous Chapter — skip to the previous chapter in the movie. Next Chapter — skip to the next chapter in the movie. Title Menu— opens the title menu of the inserted DVD. Mute — click to mute movie sound.
WinDVD™ Click this Maximizing the video window To close the WinDVD control panel and expand the video window to fill the screen, click the Maximize button. To display the control panel again, double-click anywhere in the video window. Using WinDVD Advanced Features TECHNICAL NOTE: The DVD author determines what features the DVD supports.
Sample WinDVD with expanded subpanel Using playlists TECHNICAL NOTE: The DVD author determines what features the DVD supports. Depending on the DVD format and your computer’s hardware configuration, some of the control panel features may be unavailable when playing a DVD. Unsupported features appear gray, and you cannot select them.
Page 176
WinDVD™ Creating a Playlist To create a new playlist: Open the playlist menu by clicking the Playlist button. See “Using the WinDVD control panel” on page 170. to locate the playlist button. Sample Playlist dialog Select New Playlist from the menu. The Playlist window opens.
Page 177
Locate each file (you may select multiple files) for your playlist using the directory browser. Highlight the files and click Add, then OK to confirm your selection. After adding all the files you want to include in the new playlist, click Save List. The Save As dialog appears.
WinDVD™ Sample Open Playlist dialog Locate the playlist you wish to open, then click Open. The Playlist window appears. Click Load List to open the saved playlists. Browse to the playlist you want to open then click Open and WinDVD displays the playlist. Getting Help Click the Help button to open the WinDVD Help system.
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Your program stops responding.
Page 180
If Something Goes Wrong To close a program that has stopped responding in the ® Windows XP operating system: Press Ctrl The Windows Task Manager appears. Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Windows Task Manager Applications tab Select the program you want to close, then click End Task.
Page 181
Windows Task Manager Shutdown menu, Turn Off option The computer shuts down. Your program performs an illegal operation. If you receive the message, “Your program has performed an illegal operation,” you should record the details of the message and consult the software manufacturer. To record the details: Click the Details button and select the text the operating system displays.
If Something Goes Wrong Problems when you turn on the computer Save the file and refer to it when you contact the software manufacturer. Problems when you turn on the computer These problems may occur when you turn on the power. The computer will not start.
The Windows The computer displays the message. Press any key. If this does not resolve then problem, press Ctrl, Alt, and Del to restart the computer. The Windows working Once you are familiar with the desktop and used to the way the operating system responds to your work routine, you can easily detect if the operating system is not working correctly.
If Something Goes Wrong The Windows The Windows options: ❖ Safe Mode ❖ Safe Mode (with Networking) ❖ Safe Mode (with Command Prompt) ❖ Enable Boot Logging ❖ Enable VGA Mode ❖ Last known good configuration (your most recent settings that worked) ❖...
My browser can’t find a site I bookmarked. The World Wide Web is constantly changing. A site you bookmarked yesterday may not be available today or its server may be down for temporary repair. Try again later. ® The Windows XP operating system can help you If the operating system has started properly, but you still have a problem using your computer, the online Help can assist...
If Something Goes Wrong Resolving a hardware conflict Choose from specific topics and follow the steps. If there is still a problem, the operating system should display a message that explains what the conflict is. A plan of action The smooth operation of the system depends on the interaction of all devices, programs, and features.
Page 187
Plug and Play With Plug and Play and the Windows avoiding hardware conflicts is easy. Plug and Play is a computer standard that helps the system BIOS (basic input/ output system) and the operating system to automatically assign resources to Plug and Play-compliant devices. In theory, if every device connected to the computer is Plug and Play-compliant, no two devices will compete for the same system resources.
If Something Goes Wrong Resolving a hardware conflict Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device. CAUTION: Changing the default settings using Device Manager can cause other conflicts that make one or more devices unusable. Device Manager is a configuration tool for advanced users who understand configuration parameters and the ramifications of changing them.
Page 189
Checking device properties Device Manager provides a way to view the properties of a device. Properties include the name of the manufacturer, the type of device, the drivers installed, and the system resources assigned to the device. To check a device’s properties: Click Start.
If the error recurs without the memory module installed, the error is not caused by the memory module. NOTE: Toshiba recommends using only memory approved by Toshiba. Power and the batteries Your computer receives its power through the AC adapter and power cable or from the system batteries (main battery and optional secondary battery).
Page 191
Let the battery discharge completely, then try charging it again. Check the power options using the Toshiba Power Management Utility. Have you added a device, such as a PC Card or memory module, that takes its power from the...
If Something Goes Wrong Resolving a hardware conflict For more information on maximizing battery power, see “Charging the battery” on page Keyboard problems If, when you type, strange things happen or nothing happens, the problem may be related to the keyboard itself. The keyboard produces unexpected characters.
Page 193
If you are using the built-in screen, make sure the display priority is not set for an external monitor. To do this, press Fn and F5 simultaneously (once). If this does not correct the problem, press Fn and F5 simultaneously again to return the display priority to its previous setting.
If Something Goes Wrong Resolving a hardware conflict A message tells you that there is a problem with your display settings and that the adapter type is incorrect or the current settings do not work with your hardware. Reduce the size of the color palette to one that is supported by the computer’s internal display.
Page 195
To run Error-checking: Click Start, then click My Computer. Right-click the drive you want to check. The drive’s properties box appears. Click on Properties. Click the Tools tab. Click the Check now button. The Check Disk box appears (for example, Check Disk You can choose one or both options: ❖...
If Something Goes Wrong Resolving a hardware conflict DVD-ROM or multifunction drive problems You cannot access a disc in the drive. Make sure the drive tray has closed properly. Press gently until it clicks into place. Open the drive tray and remove the disc. Make sure the drive tray is clean.
Page 197
The color of the materials used to make the disc can affect its reliability. Silver-colored CD-ROMs are the most reliable, followed by gold-colored CD-ROM. Green-colored CD- ROMs are the least reliable. WinDVD problems: General issues WinDVD has been configured to provide optimum performance and quality based upon your system’s available resources.
Page 198
If Something Goes Wrong Resolving a hardware conflict The Root or Title menu does not open. Most DVD titles have one or both of the “Root” and “Title” menus. If one menu button appears to do nothing, try the other menu button. WinDVD performance decreases after making a system change.
Page 199
Verifying that your display driver resolution, color depth and refresh rate are optimal for DVD playback. (Some systems do not support video overlays if these parameters are not optimal.) Try lowering these settings to improve performance. WinDVD problems: Content issues Movies exhibit poor performance of “Director's Commentary”...
Page 200
If Something Goes Wrong Resolving a hardware conflict WinDVD: Error messages This table offers descriptions and resolutions for error messages that may appear when using WinDVD. Error message and additional information The disc in the DVD-ROM drive is not a valid disc type.
Page 201
Error message and additional information WinDVD cannot display the selected resolution due to system limitations. The screen size exceeds the allowable display limit. There are not enough sys- tem resources to play the DVD at the selected setting. The audio settings are incorrect.
Page 202
If Something Goes Wrong Resolving a hardware conflict Error message and additional information There is a problem with the copy protection system within the DVD-ROM drive. Playback cannot con- tinue. The DVD-ROM drive failed to authenticate (authorize playback of) the DVD disc.
Page 203
Error message and additional information Permission to play is denied. Please check the Parental Control setting. The Parental Control set- ting of WinDVD is lower than the Parental Control level of the content being played. Playback of the DVD disc is not authorized. WinDVD encountered an error.
If Something Goes Wrong Resolving a hardware conflict Sound system problems You do not hear any sound from the computer. Adjust the volume control. If you are using external headphones or speakers, check that they are securely connected to your computer. The computer emits a loud, high-pitched noise.
Page 205
Other cards must be set up before you can use them. Use the ® Windows XP PC Card (PCMCIA) Wizard to set up the card. Refer to your Microsoft information, or refer to the documentation that came with the PC Card. Some card manufacturers use special software called enablers to support their cards.
Page 206
If Something Goes Wrong Resolving a hardware conflict Click My Computer icon with the secondary button, then click Properties. The System Properties dialog box appears. Click the Hardware tab. Click the Device Manager button. Double-click the category listed as PCMCIA adapter. The operating system displays your PC Card’s Properties dialog box, which contains information about your PC Card configuration and status.
Turn off the computer. Connect the AC adapter and power cable. Keep the computer plugged in for about three hours with the power turned off. The problem may also be caused by a conflict with any additional memory in your system. Removing a malfunctioning card and reinstalling it can correct many problems.
If Something Goes Wrong Resolving a hardware conflict You may have connected the printer while the computer is on. Disable Standby mode, turn off the computer, and turn off the printer. Turn the printer back on, make sure it is on line, then turn the computer back on.
The modem is on, set up properly and still will not transmit or receive data. Make sure the line has a dial tone. Connect a telephone handset to the line to check this. The other system may be busy or off line. Try making a test transmission to someone else.
Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first. Try the following before contacting Toshiba: ❖ Review the troubleshooting information in your Windows ❖...
For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba If you still need help and suspect that the problem is hardware-related, Toshiba offers a variety of resources to help you. Start with accessing Toshiba on the Internet using any Internet browser by typing Next, try one of Toshiba’s online services.
If Something Goes Wrong Other Toshiba Internet Web sites Other Toshiba Internet Web sites toshiba.com computers.toshiba.com www.toshiba.ca www.toshiba-Europe.com www.toshiba.co.jp/index.htm http://servicio.toshiba.com Toshiba’s worldwide offices Australia Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia Belgium Toshiba Information Systems Benelux (Belgium) B.V.
Page 213
Szerencs utca 202 1147 Budapest Hungary Italy Progetto Elettronica 92 s.r.l. Viale Certosa 138, 20156 Milano Italy Luxembourg Toshiba Information Systems Benelux B.V. Rivium Boulevard 41 2909 LK, Capelle a/d IJssel The Netherlands Morocco C.B.I. 22 Rue de Béthune Casablanca Morocco...
Page 214
Ur. Quinta Grande 2720 Alfragide Portugal Slovakia HTC a.s. Dobrovicova 8 81109 Bratislava Slovakia Spain Toshiba Information Systems (España) S.A. Parque Empresarial San Fernando Edificio Europa, 1a Planta Escalera A 28831 (Madrid) San Fernando de Henares Spain Switzerland Ozalid AG Herostrasse 7 8048 Zürich...
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Instant password security Without a password The Fn + F1 key combination turns off the display and...
Hot Keys Instant password security the display’s content reappear. The Windows system log-on screen will appear, prompting you for a password. After typing in the password for the current user, press Enter. To activate the password feature: Click Start, Control Panel. Click Appearances and Themes.
Sample power usage modes The power usage mode in the Windows under AC power is Full Power only. The properties of each mode are set in the Toshiba Power Management utility. This hot key cycles through the different alarm Hot Keys Sound ®...
Hot Keys Stand by mode Stand by mode This hot key puts the computer into Stand by mode. Sample Stand by confirmation box ❖ A message box is displayed by default to confirm that the computer is going into Stand by mode. This message box can be set so it doesn’t display.
Hibernation mode This hot key puts the computer into Hibernation mode. Sample Hibernation confirmation box Hibernation mode ❖ If Hibernation mode is enabled (the default) a message box is displayed by default to confirm the computer is going into Hibernation mode. The message box can be set so it doesn’t display.
Hot Keys Display modes Display modes This hot key cycles through the power-on display options. The display modes are: Sample display options window In o resolution of the internal display panel to match the resolution of the external display device. Display modes display mode options.
Enabling a wireless device This hot key enables/disables the optional wireless devices in your computer (for systems with Wi-Fi only). The wireless modes are: Bluetooth module Wi-Fi enabled—This enables only the Wi-Fi module. All devices enabled—This enables both the Bluetooth module and the Wi-Fi modules.
Hot Keys Keyboard hot keys Keyboard hot keys and off. off. off. For more information, see This hot key turns the cursor control overlay on This hot key turns the numeric overlay on and This hot key turns the scroll lock feature on and “Overlay keys”...
Appendix B Power Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved...
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory...
Page 225
direct memory access DIMM dual inline memory module disk operating system dots per inch DSTN dual supertwist nematic digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory enhanced capabilities port EPROM erasable programmable read-only memory file allocation table Federal Communications Commission fast infrared gigabyte...
Page 226
Glossary PCMCIA SCSI SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 227
alternating current (AC) — The type of power usually supplied to residential and commercial wall outlets. AC reverses its direction at regular intervals. Compare direct current (DC). application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems.
Page 228
Glossary bus — An electrical circuit that connects the central processing unit (CPU) with other parts of the computer, such as the video adapter, disk drives, and ports. It is the pathway through which data flows from one device to another. See also bus speed, frontside bus.
Page 229
color palette — A set of specified colors that establishes the colors that can be displayed on the screen at a particular time. compatibility — The extent to which computers, programs, or devices can work together harmoniously, using the same commands, formats, or language as another.
Page 230
Glossary direct memory access (DMA) — A dedicated channel, bypassing the CPU, that enables direct data transfer between memory and a device. directory — See folder. disable — To turn a computer option off. See also enable. disc — A round, flat piece of metal, designed to be read from and written to by optical (laser) technology, and used in the production of optical discs, such as CDs and DVDs.
Page 231
driver — See device driver. DVD — An individual digital versatile (or video) disc. See also DVD-ROM. DVD-ROM (digital versatile [or video] disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs.
Page 232
— The physical components of a computer system. Compare software. Hibernate — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 233
hot key — (1) A feature in which certain keys in combination with key can set system options or control system parameters, such as the battery save mode. (2) A key or combination of keys that activates a memory resident program. hot swapping —...
Page 234
Glossary liquid crystal display (LCD) — A type of display that uses a liquid substance between two transparent electrode panels. When an electric current passes through the electrodes, the molecules in the liquid form a crystalline pattern that polarizes the light passing through it.
Page 235
multimedia — A combination of two or more media, such as sound, animation, and video in a computer program or presentation. Musical Instrument Digital Interface — See MIDI. network — A collection of computers and associated devices that are connected by communications facilities. A network allows you to share data and peripheral devices, such as printers, with other users and to exchange electronic mail.
Page 236
Glossary PC Card — A credit-card-sized expansion card designed to increase the capabilities of notebook computers. PC Cards provide functions such as modem, fax/modem, hard disk drive, network adapter, sound card, or SCSI adapter. peripheral — Any device, such as a printer or joystick, that is attached to the computer and controlled by the computer’s CPU.
Page 237
removable disk — A disk that can be removed from a disk drive. A diskette is one example of a removable disk. resolution — A measure of the sharpness of the images that can be produced by a printer or displayed on a screen. For a printer, resolution is expressed in dots per inch (dpi).
Page 238
Glossary Standby — A feature of some Windows allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again. Suspend — A feature of some Windows allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again.
CD Player CD/DVD control DVD-ROM or multifunction Internet one-touch TV out PC Card eject power Start TOSHIBA Console calculator caps lock light Card and Socket Services CD and DVDs caring for viewing contents CD Player control panel CD/DVD control and digital audio...
Page 240
inserting problem solving channels Character Map charging main battery RTC (real-time clock) battery checking device properties cleaning CD or DVDs computer click closing programs comfort chair lighting work habits commands Hibernate powering down Standby communications programs setting up system resources via modem compact discs inserting...
Page 241
shortcut menu Start button system tray 113, 124 taskbar Device Manager checking properties disabling a device dial-up connection Dial-Up Networking Wizard Digital Subscriber Lines (DSL) DirectShow DirectX Foundation disk activity light Disk Defragmenter disk drive corrupted/damaged data files missing files/trouble accessing a disk running slow diskettes...
Page 242
FAT (File Allocation Table) files 70, 76 backing up copying to diskette printing 69, 74 saving transferring Fn key folders displaying information front panel 35, 71 function keys hard disk drive 36, 52 light hardware conflicts resolving headphone jack 137, 185 Help Hibernate restarting...
Page 243
function keys hot keys indicator panel 182, 192 not working numeric keypad overlay overlay keys unexpected characters Windows special keys lights AC power 36, 52, 101 battery caps lock cursor control mode disk activity DVD-ROM/multifunction drive 36, 52 hard disk drive numeric mode on/off lock slot...
Page 244
PC Card inserted computer will not power up 210, 211 contacting Toshiba corrupted/damaged data files Device Manager disabling a device disk drive is slow display is blank DVD-ROM or multifunction...
Page 245
external monitor faulty memory 185, 186 hardware conflict hardware conflict caused by legacy device Help high-pitched noise illegal operation Internet bookmarked site not found Internet connection is slow keyboard not responding keyboard produces unexpected characters missing files/trouble accessing a disk modem not receiving or 208, 209 transmitting...
Page 246
Toshiba Forum Internet Web sites online services Toshiba Accessories information TOSHIBA Console button TouchPad using using with control buttons transferring files transferring information between computers traveling tips Turn Off restarting from...
Page 247
PC Cards Standby video features exploring volume, adjusting alarm warranty SelectServ Web address Web browsers Web content interface Web sites Web sites,Toshiba windows hiding repositioning 123, 125 resizing Windows Explorer Windows Help Windows Media Player Windows Standby Windows XP change date and time settings...
Page 248
wireless mode hot key Wizards Add Printer Windows PC Card World Wide Web...