Pointing Devices - Toshiba SATELLITE 2610 Series User Manual

Pointing Devices

This tab lets you select Auto-Selected and Simultaneous.
Auto-Selected
Simultaneous
Display
This tab lets you customize your computer's display settings for either the
internal LCD screen or for an external monitor.
Power On Display
Lets you set the display to be used when the computer is booted.
Auto-Selected
Simultaneous
You cannot select TV display in Hardware Setup or TSETUP. To display
on a TV screen use hot keys Fn + F5. Refer to Chapter 5, Keyboard.
The LCD Display Stretch feature cannot be set in the Display window of
Hardware Setup. To set this function, follow the steps below.
1. Click Start, point to Settings and click Control Panel.
2. Double-click the Display icon to open the Display Properties
window. Then continue with step 3.
3. Click the Settings tab and click the Advanced button.
4. Click the Flat Panel tab and click the Display Stretch check box.
User's Manual
If a PS/2 mouse is connected to the computer
when you turn on the power, the PS/2 mouse is
enabled and the AccuPoint II is disabled.
Otherwise, the AccuPoint II is enabled. (Default)
Enables both the AccuPoint II and PS/2 mouse.
Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD. (Default)
Selects both the internal LCD and external
monitor for simultaneous display.
Setup and Password Security 8-3