HDD
This field displays the HDD Mode. It cannot be changed by the Hardware
Setup program. However, you can change it from Enhanced IDE to
Standard IDE mode by using the TSETUP program, explained later in this
chapter.
Password
User Password
This option allows you to set or reset the user password for power on
and instant security.
Registered
Not Registered
You can also set a supervisor password by using an MS-DOS utility.
Refer to the Password security section later in this chapter for details on
setting the supervisor password and user password in the TSETUP
program.
Device Config
Device Configuration
This option lets you set the device configuration.
All Devices
Setup by OS
8-8 Setup and Password Security
Set the password. A dialog box will appear to
let you set the password.
Change or remove the password. (Default)
BIOS sets all devices.
Operating system sets devices that it can control.
User's Manual