Battery Save Mode
This option is used to select Full Power, Low Power or User
Setting of the BATTERY SAVE OPTIONS.
These settings are for the MS-DOS environment only. When you use
Windows, settings made in Power Saver will be used.
Full power
Low Power
User Setting
User's Manual
The following shows full power settings.
(Default)
BATTERY SAVE OPTIONS
Processing Speed = High
CPU Sleep Mode
Display Auto Off = 30Min.
HDD Auto Off
LCD Brightness
Cooling Method
* Displays Super-Bright when the
AC adaptor is connected and Bright when
using battery power.
The following shows low power settings:
BATTERY SAVE OPTIONS
Processing Speed = Low
CPU Sleep Mode
Display Auto Off = 03Min.
HDD Auto Off
LCD Brightness
Cooling Method
* Displays Bright when the AC adaptor is
connected and Semi-Bright when using
battery power.
This option, allows you to set the battery save
parameters on the sub-window, BATTERY SAVE
OPTIONS. When you select this option, the
automatic setting feature (Full Power or Low
Power) is disabled and the user-preferred
parameters become effective.
= Enabled
= 30Min.
= Super-Bright or Bright*
(TFT LCD)
Bright
(DSTN LCD)
= Performance
= Enabled
= 03Min.
= Bright or Semi-Bright*
(TFT LCD)
Semi-Bright
(DSTN LCD)
= Quiet
Setup and Password Security 8-19