Choosing Test Options - Toshiba SATELLITE 2610 Series User Manual

Choosing test options

Before the test begins, you are prompted to select whether to test the
following components. To select the test, type Y at the prompt,
otherwise type N.
Component
Diskette drive
Hard disk drive
Printer
10-18 Troubleshooting
Prompt
Test the FDD (Y/N)?
This test writes patterns to the diskette. Use a
formatted, write-enabled diskette. Data on the
diskette will be destroyed.
Test the HDD (Y/N)?
This test writes a small amount of data to the
hard disk.
Test the Printer (Y/N)?
Before executing this test, make sure the printer
is connected and turned on.
If you select Y, the following prompt will appear:
Compatible with IBM printer (Y/N)?
Select Y for IBM compatible and N for non-
compatible. If you are not sure, select N.
Selecting Y for a non-compatible printer may
result in garble and processing of excess pages.
User's Manual