Toshiba SATELLITE 2610 Series User Manual page 100

Parallel/Printer
This tab lets you set the Printer Port Type. Use the Windows Device
Manager to make settings for the Parallel port.
Printer Port Type
The options in this tab are ECP and Standard Bi-directional.
ECP
Standard
Bi-directional
Hardware Alarm
This window lets you set conditions for audio alarms.
Slider: Move the slider to set the alarm volume to 100%, 66% or 33%.
To turn off audio alarms, set the slider to 0%. Default is 100%.
Click the box to enable or disable the following functions:
Low Battery Alarm On: enables the alarm. (Default)
Panel Close Alarm On: enables the alarm. (Default)
System Beep
User's Manual
Sets the port type to Extended Capabilities Port
(ECP). For most printers, the port should be set
to ECP. (Default)
This setting should be used with some other
parallel devices.
Off: disables the alarm
Off: disables the alarm
On: enables the alarm. (Default)
Off: disables the alarm
Setup and Password Security 8-9