Monitor; Sound System - Toshiba SATELLITE 2610 Series User Manual

Monitor

Refer also to Chapter 9, Optional Devices, and to your monitor's
documentation.
Problem
Monitor does not turn
on
No display
Display error occurs

Sound system

Refer also to Chapter 8, Setup and Password Security.
Problem
No sound is heard
10-14 Troubleshooting
Procedure
Make sure that the external monitor's power
switch is on. Confirm that the external monitor's
power cable is plugged into a working power
outlet.
Try adjusting the contrast and brightness
controls on the external monitor.
Press hotkeys Fn + F5 to change the display
priority and make sure it is not set for the
internal display.
Check that the cable connecting the external
monitor to the computer is attached firmly.
Run the diagnostic test program.
If problems persist, contact your dealer.
Procedure
Adjust the volume control dial.
Check the software volume settings.
Make sure the headphone connection is secure.
Check Windows 98 Device Manager. Make sure
the sound function is enabled and that settings
for I/O address, Interrupt level and DMA are
correct for your software and do not conflict
with other hardware devices that you may have
connected to the computer.
If problems persist, contact your dealer.
User's Manual