Toshiba SATELLITE 2610 Series User Manual page 115

Built-in Modem
This option allows you to set the COM level for the built-in modem port.
If a built-in modem (not available in some markets) is not installed, this
selection is not active.
The built-in modem port interrupt request level (IRQ) and I/O port base
address for each COM level is shown below.
COM level
COM1
COM2
COM3
COM4
Not used
If the setting for the built-in modem port is the same as that for the
Serial or Parallel port, the port(s) is set to Not Used or disabled.
Parallel
Use the Device Manager to change these settings. Refer to your
Windows 98 documentation. The Parallel Port field lets you set the
I/O address for the parallel port and the Parallel Port Mode.
When the Parallel Port Mode (see settings below) is set to Standard
Bi-directional, the options are:
LPT setting
LPT 1
LPT 2
LPT 3
Not Used
Others
8-24 Setup and Password Security
I/O address Interrupt level
4 (Default)
3F8H
2F8H 3
3E8H 4
2E8H 3
(Disables port)
I/O address Interrupt level
378H 7
278H 5
3BCH 7
(Disables port)
(Other settings made automatically by
plug-and-play operating systems)
User's Manual