Diskette Drive; Printer - Toshiba SATELLITE 2610 Series User Manual

Diskette drive

For more information, refer to Chapter 4, Operating Basics.
Problem
Some programs run
correctly, but others
do not
You cannot access the
diskette drive

Printer

Refer also to the Parallel printer section in Chapter 9, Optional devices,
and to the troubleshooting and other relevant sections in your printer
and software documentation.
Problem
Printer does not
turn on.
Computer/printer do
not communicate
Printer error
User's Manual
Procedure
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software's needs.
Try another disk. If you can access this disk, the
original disk (not the disk drive) is probably
causing the problem.
Run the diagnostic test program TDIAGS.
If problems persist, contact your dealer.
Procedure
Check that the printer is connected to an electric
outlet. Make sure the outlet is supplying power
by plugging in an appliance.
Make sure the printer is turned on and is online
(ready to use).
Inspect the cable connecting the printer to the
computer for damage. Make sure it is securely
connected.
A parallel printer connects to the parallel port
and a serial printer to the serial port. Make sure
the ports are configured correctly.
Make sure your software is configured to
recognise the printer. Check your printer and
software documentation.
Run the diagnostic test TDIAGS.
Check your printer documentation.
If problems persist, contact your dealer.
Troubleshooting 10-11