Removing A Memory Module - Toshiba Satellite User Manual

19 Reconnect the cables.
20 Restart the computer.
You can now continue setting up the computer. When the
operating system has loaded, you can verify that the
computer has recognized the additional memory module.
If you are adding extra memory after setting up the
computer, verify that the computer has recognized it
correctly as described in
page 55.

Removing a memory module

If you need to remove a memory module:
1 Complete steps
page 47
memory module slot cover.
2 Pull the latches away from the memory module.
The memory module pops up slightly.
NOTE
TECHNICAL NOTE: You must have at least one memory
module installed for the computer to work.
1–10
to shut down the computer and open the
Do not try to remove a memory module with the
computer turned on. You can damage the computer and
the memory module.
Do not remove the memory module while the computer
is in Sleep or Hibernation mode. The computer could
hang up the next time you turn it on and data in memory
will be lost. In either of the above cases, the Sleep
configuration will not be saved.
If your system has the memory modules stacked on top
of one another, you must remove the top module first
before removing/installing the bottom module.
Getting Started
Removing a memory module
"Checking total memory" on
in "Installing a memory module" on
53