Toshiba SATELLITE 2610 Series User Manual page 27

Hibernation
You cannot use Hibernation under the following conditions:
You are using DriveSpace or other compression utility.
You are using Windows 98 drive converter to convert drives to the File
Allocation Table 32 format.
Standby
(Windows 98 only)
Do not install or remove a memory module while the computer is in
Standby mode. The computer or the module could be damaged.
Do not remove the battery pack while the computer is in Standby mode.
Data in memory will be lost.
1-8 Introduction
This feature lets you turn off the power without
exiting from your software. The contents of main
memory is saved to the hard disk, when you
turn on the power again, you can continue
working right where you left off. Use the
Hibernate window of Power Management
Properties to enable or disable Hibernate
support. Also, in the System Power Mode of the
Power Saver utility, two Hibernate settings are
available: When I press the power button and
When I close the lid.
In Standby mode, power to the system remains
on, but the CPU and all other devices are in
sleep mode. When the computer is in standby
mode, the Power LED glows orange. To enter
Standby mode click Start, click Shut Down,
select Standby and click OK. The computer
enters Standby mode regardless of the
Hibernate setting.
User's Manual