Accupoint Ii Precautions; Replacing The Cap - Toshiba SATELLITE 2610 Series User Manual

AccuPoint II precautions

Under certain conditions, the on-screen pointer may travel contrary to
AccuPoint II operation or an error message may appear. For example, if

 You touch the AccuPoint II during power-up.

 You apply constant, soft pressure to the AccuPoint II.

 There is a sudden temperature change.

 Strong stress is applied to the AccuPoint II.
If an error message appears, reboot the computer. If an error message does
not appear, wait a moment for the pointer to stop, then continue operation.

Replacing the cap

The AccuPoint II cap is an expendable item that can be purchased from
your computer dealer. It should be replaced after prolonged use.
1. To remove the AccuPoint II cap, firmly grasp the cap and pull it
straight up.
2. Position a new cap on the peg and press it into place.
The peg is square, so be careful to align the cap's square hole with the peg.
4-2 Operating Basics
ACCUPOINT II CAP
PEG
Removing the AccuPoint II cap
User's Manual