Removing Memory Module - Toshiba Satellite Pro A300D Series User Manual

Removing memory module

To remove the memory module, make sure the computer is in boot mode
then:
1. Turn the computer off and remove all cables connected to the com-
■
If you use the computer for a long time, the memory modules will
become hot. In this case, let the memory modules cool to room
temperature before you replace them.
■
Do not try to remove a memory module with the computer turned on or
turned off in sleep and hibernation mode. You can damage the
computer and the memory module.
2. Turn the computer upside down and remove the battery pack (refer to
3. Remove one screw securing the memory module cover.
4. Lift off the cover.
5. Use a slender object such as a pen to press two latches on either side
6. Grasp the memory module by the sides and pull it out.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
7. Seat the cover and secure it with one screw.
User's Manual
puter.
Chapter 6, Power and Power-up
of the memory module to the outside. The memory module will pop
up.
Figure 8-10 Removing the memory module
Modes.)
Optional Devices
8-10