Additional Battery Pack; Additional Ac Adaptor; Battery Charger; Parallel Printer - Toshiba SATELLITE 2610 Series User Manual

Additional battery pack

You can increase the portability of the computer with additional battery
packs (PA2487U). If you're away from an AC power source and your
battery runs low, you can replace it with a freshly charged battery. See
Chapter 6, Power and Power-Up Modes.

Additional AC adaptor

If you frequently transport the computer between different sites such as
your home and office, purchasing an AC adaptor (PA2450U) for each
location will reduce the weight and bulk of your carrying load.

Battery charger

The battery charger (PA2488U) provides a convenient way to charge
battery packs without requiring the use of your computer. The battery
charger holds up to two Lithium-ion battery packs, which it charges one
after the other in succession. Charging time is about 3.0 hours per battery.

Parallel printer

You can connect any standard Centronics-compatible parallel printer to
your computer. All you need is an IBM PC™ parallel printer cable. Your
dealer can supply one or you can purchase one at most computer stores.
The cable's connectors are designed so that it is impossible for you to
connect them incorrectly. To connect a printer, follow these steps:
1. Turn off the computer.
2. Insert one end of the cable into the computer's parallel port.
3. Tighten the screws that fasten the cable connector to the computer's
parallel port.
4. Insert the other end of the cable into the printer's parallel connector.
5. Fasten the connector to the printer with the clips on the parallel port.
6. Turn on the printer.
7. Turn on the computer.
8. Start the Hardware Setup program. Refer to Chapter 8 Setup and
Password Security.
9. Select the Parallel/Printer tab from the Hardware Setup window.
10. Set the printer port type to ECP and press OK
11. Choose Reboot for the change to take effect.
12. Select the printer in Windows Add Printer Wizard. To access the Add
Printer Wizard utility, click Start, point to Settings, click
Printers and double-click the Add Printer icon.
User's Manual Optional Devices 9-9