Toshiba SATELLITE 2610 Series User Manual page 10

Network connection (class A warning)
If this product has networking capabilities and will be connected to a
network, Class A radiation limits will be observed (in accordance with
technical conventions). This means that if the product will be used in a
domestic environment, other devices in the near surrounding may suffer
interference. Consequently, please do not use this product in such
environments (for example a living room), otherwise you could be held
responsible for any ensuing interference.
Conformity Statement
The equipment has been approved to [Commission Decision "CTR21"] for
pan-European single terminal connection to the Public Switched
Telephone Network (PSTN). However, due to differences between the
individual PSTNs provided in different countries the approval does not,
of itself, give an unconditional assurance of successful operation on every
PSTN network termination point.
In the event of problems, you should contact your equipment supplier in
the first instance.
Network Compatibility Statement
This product is designed to work with, and is compatible with the
following networks. It has been tested to and found to conform with the
additional requirements contained in EG 201 121.
Germany
Greece
Portugal
Spain
Switzerland
All other countries
Specific switch settings or software setup are required for each network,
please refer to the relevant sections of the user guide for more details.
The hookflash (timed break register recall) function is subject to separate
national type approval. It has not been tested for conformity to national
type regulations, and no guarantee of successful operation of that
specific function on specific national networks can be given.
x
- ATAAB AN005, AN006, AN007, AN009, AN010,
and DE03, 04, 05, 08, 09, 12, 14, 17
- ATAAB AN005, AN006 and GR01, 02, 03, 04
- ATAAB AN001, 005, 006, 007, 011 and P03, 04,
08, 10
- ATAAB AN005, 007, 012, and ES01
- ATAAB AN002
- ATAAB AN003, 004
User's Manual