Pci Bus - Toshiba SATELLITE 2610 Series User Manual

When the Parallel Port Mode (see settings below) is set to ECP, the DMA
channel can also be set to 1 or 3. The default is 3.
LPT setting
LPT 1
LPT 2
LPT 3
Not Used
Others

PCI bus

It is for information only and cannot be changed. It appears only
in TSETUP.
PCI BUS
PC Card
This option lets you set the PC Card Controller mode. Refer to Hardware
Setup for details.
Drives I/O
This item displays the installed hard disk drives and CD/DVD-ROM
drives: HDD, CD-ROM. It appears only in TSETUP.
Settings for Hard Disk Drive
HDD
Settings for CD/DVD-ROM drive
CD-ROM
Floppy disk I/O
This item displays the address, interrupt level and channel settings for
the diskette drive. It appears only in TSETUP.
Floppy Disk
User's Manual
I/O address
378H
278H
3BCH
= IRQ11
= Primary IDE (1F0H/IRQ14)
(HDD ready for use)
= Secondary IDE (170H/IRQ15)
(CD/DVD-ROM ready for use)
= (3F2H/IRQ6/CH2)
Interrupt level
7
5
7
(Disables port)
(Other settings made automatically by
plug-and-play operating systems)
Setup and Password Security 8-25
DMA Channel
3 (Default)
3
3