Positioning Transparent Documents On The Original Glass - Konica Minolta Di1611 Advanced Information

3

Positioning transparent documents on the Original Glass

When copying a highly transparent or translucent document, such as OHP
transparencies, tracing paper or diazo photosensitive paper, position it as
described below.
1
Lift open the Original Cover, or the Document Feeder if it is installed.
2
Position the document to be copied
face down on the Original Glass.
Align the document on the
scales above and to the left of
the Original Glass.
3
Place a blank sheet of paper of the
same size over the document.
4
Carefully close the Original Cover,
or the Document Feeder if it is
installed.
5
If necessary, specify any other copy
settings.
Before Making Copies (p. 5-1)
Advanced Copy Operations (p. 6-1)
6
Press the [Start] key.
3-10
Basic Operations
Di1611/Di2011