To Replace The Toner Bottle - Konica Minolta Di1611 Advanced Information

8

To replace the toner bottle

1
Open the Front Cover.
2
Swing out the Toner Bottle Holder,
and then remove the toner bottle.
3
Holding the sealed end of the new
toner bottle up, slowly peel off the
seal toward you.
?
Have the necessary precautions
been observed when peeling off
the seal?
Since some toner may spurt out
while the seal is being peeled
off, be sure to peel off the seal slowly.
4
With the side of the toner bottle
marked "UP" facing up, insert the
toner bottle into the Toner Bottle
Holder.
?
Have the necessary precautions
been observed while inserting
the toner bottle?
As shown at the right, the tab on
the toner bottle should securely fit into the notch in the Toner Bottle
Holder.
8-2
Error Messages
Di1611/Di2011